Product Description:

The MS2S04-C0BTN-IMHG1-NNDNN-NN is a synchronous servo motor produced by Bosch Rexroth Indramat. It belongs to the MS2S Synchronous Servomotors series and is designed for direct mounting on compact machinery. The motor converts drive current into precise torque for controlled stopping, starting, and reversing. This performance supports motion axes in assembly lines, packaging stations, and electronic pick-and-place equipment where accurate positioning and responsive movement are required.

At a nominal speed of 6000 rpm, the rotor supports rapid cyclic motion for high-speed automated processes. Position data are delivered through a magnetic multi-turn encoder with an 18-bit single-turn resolution, providing 262,144 discrete positions per mechanical revolution. Thermal management relies on a self-cooling housing, so the motor does not require an external fan or liquid-cooling circuit. For vertical or load-holding axes, an integrated spring-applied brake provides 3.50 Nm of static torque and can be actuated up to 20 times per hour. The motor has an IP65 enclosure rating, which protects its interior against dust ingress and low-pressure water jets. This protection permits installation near coolant lines or in dusty conveyor areas while helping preserve the integrity of the internal electrical insulation.

The flange has a 50 mm centering collar that supports accurate alignment with the machine mounting surface. The shaft includes a DIN 332 tapped hole, and its coaxiality tolerance is 0.08 mm. Drive torque is transmitted through a 14 mm smooth shaft with a sealing ring, which helps prevent lubricant migration and contaminant entry around the bearing area. Power, brake, and feedback conductors share a single M17 connector fitted with a quick-lock SpeedTec latch, allowing the connection to be secured without tools. The encoder electronics operate from an 8–12 V supply and draw no more than 130 mA, allowing a low-power logic supply to energize the sensing element without a separate regulator.