MS2N13-E1BHC-BMEG0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911399661
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N13-E1BHC-BMEG0-NNNNN-NN Servo Motor is manufactured by Bosch Rexroth Indramat. This motor has a winding of 2,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, with shaft seal shaft, and a N/A electrical connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
For industrial applications demanding robust performance across varying environmental conditions, the MS2N13-E1BHC-BMEG0-NNNNN-NN is the best option designed by Bosch Rexroth. The machine has the capacity to run normally at 2k rpm under normal constraints. However, at the upper limit electrically or mechanically, the machine can have the capacity to run at 3600 rpm. The motor insulation class over the winding for thermal protection against high temperature is F, whereas the resistance offered by winding is 0.058 ohm at 20 degrees centigrade. The unwanted capacitance is 24.3 nF between different parts of an electronic component, and this causes losses in efficiency.
The motor MS2N13-E1BHC-BMEG0-NNNNN-NN is built for IM B35 mounting, which means it can be installed using both feet and a flange. It has an average rotor moment of inertia of 0.9 kgm2 as compared to other variants of this synchronous servo motor. To cater to the heating dilemma, the motor is designed with a forced ventilation system and this system is based on an axial blower with a phase supply compromising of 400 V. To power up the motor, the electrical connection is through terminal boxes from either side A or B with the size 3.
For optimal performance and longevity, it is recommended to maintain relative humidity between 5% and 95%, and absolute humidity between 1 and 29 g/m3. This variant of motor MS2N13-E1BHC-BMEG0-NNNNN-NN has the standard performance of an encoder with a multi-turn design. The encoder has 128 signal periods Hiperface whereas the design has 4096 absolute revolutions. The driven shaft is smooth and carries the output power transmission, and to enhance its protection, the manufacturer designed it with sealing rings. The motor has universal bearings and is equipped with standard flange exactness.
