MS2N10-E0BHL-BMAH3-NNNNN-NN

Product Description:

The MS2N10-E0BHL-BMAH3-NNNNN-NN servo motor is a product of Bosch Rexroth Indramat. The motor has a smooth shaft that is devoid of a shaft seal. The motor offers accurate synchronization and consistent feedback.

With both internal and external cooling, the boasts a maximum torque of 234.0 Nm and a stationary torque of 162.0 Nm at 100k. Internal cooling is maintained at 85.3 Nm of torque at 60k that ensures efficient operations of the servo motor. Dynamic motion control becomes much easier at a maximum speed of 4000 rpm. The spigot and flange have a combined diameter of 180 mm and 196 mm, respectively, and this helps in creating a strong mechanical connection. The M12 mounting hole on the shaft allows for secure assembly, and the motor's bolt circle dimension is 215 mm. The 80 mm length and 38 mm width of the shaft make it ideal for a mechanical direct connection. The encoder is a multiturn encoder and can turn 4096 times, so it can give correct position feedback. By using Hiperface SIL2 PLd, the encoder can manage 128 signal times. The motor should be connected to the power source using an M58 A-side connector angle. The rotor's rotational properties are set by its inertia, which is 0 kg/m² when there is no brake and 0.0141 kg/m² when there is one.

The MS2N10-E0BHL-BMAH3-NNNNN-NN servo motor has a bolt circle of 215 mm and a flange size of 196 mm, which means it can be mounted rigidly. The IP65 protection code keeps dust out. With a total weight of 56 kg, the foundation and building plan are correct. It keeps the power stable by water cooling and making sure it always works within certain limits.