MS2N10-E0BHB-BMBG3-NNNNN-NN

Product Description:

The MS2N10-E0BHB-BMBG3-NNNNN-NN motor from Bosch Rexroth Indramat comes from the MS2N Synchronous Servo Motors series. It has a rated power of 4.1 kW, combined with a rated torque of 21.0 Nm and a maximum torque value of 63.0 Nm built for dynamic movement in industrial machines. Frame design follows the series standard, and rotation speed goes up to 3000 rpm, which fits motion control roles where accuracy and repeatability are required throughout every cycle. The rated current of 9.3 A pairs with a 400 V rated voltage, supporting stable running conditions.

Protection here is strong, thanks to the IP65 rating. Motor use won’t get interrupted by dust or water spray coming from factory floors or processed areas. The cooling comes only via natural convection, which skips added fans or liquid channels, so setup stays simple while reliability holds up—less to service later. For connections, the setup uses a rotatable connector that adapts to different build-outs, minimizing cable issues during install or future service. Position awareness is handled by the multi-turn absolute encoder, EnDat 2.2, ensuring movement feedback is available all through the machine sequence.

'Encoder type' in this model covers operations that need multi-cycle accuracy, with feedback for position storing—even if power drops out. Threaded assemblies or index marks aren't needed with this integrated feedback. The MS2N10-E0BHB-BMBG3-NNNNN-NN fits best into automation where detailed moves, safe starting, and repeat stops matter daily. Cooling by only air means no need for air ducts or external cooling hardware. Overall, the surface protection combines hard shell frame with sealed joints, supporting a low call-out rate after commissioning. The motor assembly weight lines up with other 4 kW category builds, holding a clean footprint for space-sensitive machine enclosures.