MS2N10-E0BHB-ASTB0-NNNNN-NN

Product Description:

The MS2N10-E0BHB-ASTB0-NNNNN-NN from Bosch Rexroth Indramat lines up with the MS2N Synchronous Servo Motors series. Built with a frame size of 10, this servo motor is fitted for jobs where compact hardware has to manage big loads or quick movements. Rated speed sits at 3000 rpm and that gives a good balance between torque delivery and consistent run cycles. Cooling keeps to the basics with natural cooling, no extra fans or complex setups required, helping simplify installation or when space is low in getting everything up and running.

A standard flange design makes this model straightforward for direct mounting, and the protection at IP65 helps cut down worries if there is moisture or some dust getting around. The winding, marked 0B, fits with the specific speed and torque profiles in mixed-duty setups. On the electrical side, the wiring goes out through standard angle connectors, which sits in the right spot for most automation cabinets. Top speed is called out at 5000 rpm. There should be minimal play in how the flange, frame, and output stay aligned, helping the motor tuck into tight spaces on assembly cells, conveyors, or precise pick-and-place stations.

A Hiperface Multiturn Absolute encoder (EnDat 2.2-compatible) keeps motor feedback tied directly to the control system, so position accuracy matches actual output, and the chance for errors stays low. Torque varies by winding but targets around 37 Nm when set for continuous tasks. The IP65 build and the mix of tough exterior finish mean the motor doesn’t need much extra guarding, and it naturally handles splashes or routine floor dust found in most plant areas. With a max speed and torque ceiling paired for variable-speed work, this servo fits uses ranging from fast indexers and feeders to high-wear automation joints that need strong position repeatability day in, day out.