MS2N10-E0BHA-BMAK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914503518
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N10-E0BHA-BMAK0-NNNNN-NN belongs to the MS2N Synchronous Servo Motors series and features a naturally cooled design (surface cooled). It offers a rated speed of 3000 rpm and a rated power of 11.5 kW. The motor is equipped with an IP65 protection class and a rotatable connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N10-E0BHA-BMAK0-NNNNN-NN is an advanced AC motor. Its input voltage range is 400 to 480 Volts AC. Three-phase power for the motor is supplied by a motor controller. Two cables for power and feedback connect the motor to the controller. There is one M58 fixed cable connector and one rotatable M17 connector on the motor. Functions of the controller include supplying motor power, controlling motor speed, and controlling a holding brake (if installed). Critical performance data for the MS2N10-E0BHA-BMAK0-NNNNN-NN motor includes 18.1 kilowatts power output, 37.4 Amps continuous power, and 96 Nm rated torque. Peak values for torque and current are 234 Nm and 102.5 Amps respectively. Moment of inertia of this low-inertia motor is only 0.0114 kg m2. The nominal and peak motor speed ratings are 1800 RPM and 6000 RPM.
The motor windings are designed for 2000 RPM operation and have 5 pole pairs. At 20 ⁰C, the torque and voltage constants for the MS2N10-E0BHA-BMAK0-NNNNN-NN motor are 2.9 Nm/A and 176.4 V/1000 RPM. Resistance and inductance of the windings are 0.244 Ohms and 7.43 mH respectively. Thermal time constants for the motor and winding are 12.5 minutes and 97.5 seconds respectively. This flange mounted motor weighs approximately 46 kilograms. Bosch has installed an axial fan for surface cooling on the unit. Operators must supply 230 Volts AC for this fan. The motor supports feedback via a multiturn encoder. The motor shaft includes a keyway. An optional shaft seal is also installed. Two methods are used for thermal overload protection: an internal sensor on the motor and a model on the motor controller. These methods combine to provide optimal motor protection for safety against overload events.
Frequently Asked Questions about MS2N10-E0BHA-BMAK0-NNNNN-NN:
Q: What is the motor shaft design?
A: The motor shaft includes a keyway.
Q: Is a seal installed on the shaft?
A: A seal is installed on the shaft.
Q: What is the motor weight?
A: The motor weight is 46 kg.
Q: Is a holding brake installed on the motor?
A: The motor is without a holding brake.
Q: What is the optimal temperature for motor operation?
A: The optimal temperature for motor operation is 0 to 40 ⁰C.
