MS2N10-E0BHA-ASAH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911387307
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N10-E0BHA-ASAH0-NNNNN-NN is part of the MS2N Synchronous Servo Motors series, featuring a rated power of 1.8 kW. This servo motor offers a rated torque of 8.5 Nm and operates at a rated speed of 3000 rpm. Its cooling type is natural convection and it includes a single-turn absolute encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Servo motor MS2N10-E0BHA-ASAH0-NNNNN-NN is part of Bosch Rexroth’s MS2N product range. It is engineered with low inertia and BH winding, supported by forced ventilation for effective cooling. This design ensures stable thermal behavior and consistent output across a wide operating range.
The MS2N10-E0BHA-ASAH0-NNNNN-NN servo motor offers 119 Nm of torque when stationary. It provides a strong holding capacity at zero speed. The motor offers a steady-state torque of 96 Nm. At 1800 rpm, the motor delivers a rated power of 18.1 kW. The corresponding rated current of the motor is 37.4 A. This ensures reliable function in standard industrial automation use. The peak torque rating is 234 Nm in a cold state and 214 Nm at operating temperature. It has a peak mechanical speed of 6000 rpm. The MS2N10-E0BHA-ASAH0-NNNNN-NN servo motor has the maximum current capacity of 102.5 A. It can operate electrically at speeds not exceeding 4000 rpm. The system’s rotor inertia of 0.0114 kg·m² allows for accurate handling of dynamic loads. The voltage constant is 176.4 V per 1000 rpm, and the torque constant is 2.9 Nm/A. The motor incorporates five pole pairs for electromagnetic operation. The motor is characterized electrically by a winding resistance of 0.244 Ω and a winding inductance of 7.43 mH. With a thermal insulation classification of 155 (F), the motor is designed for continuous operation.
The total mass of the MS2N10-E0BHA-ASAH0-NNNNN-NN servo motor is around 46 kg in its brake-free version. The mechanical layout specifies a flange diameter of 196 mm, a shaft diameter of 38 mm, and a shaft length of 80 mm. The centering collar measures 180 mm, and the mounting hole circle is 215 mm. The mounting holes are 14 mm in diameter. It supports a B5 flange-mounted arrangement.
Frequently Asked Questions about MS2N10-E0BHA-ASAH0-NNNNN-NN:
Q: What ambient temperature suits MS2N10-E0BHA-ASAH0-NNNNN-NN operation best?
A: The MS2N10-E0BHA-ASAH0-NNNNN-NN is designed for ambient temperatures up to 40°C without derating. Above this, output performance must be reduced to avoid overheating.
Q: How does MS2N10-E0BHA-ASAH0-NNNNN-NN handle humidity exposure?
A: The motor is suitable for environments with ≤95% non-condensing humidity. Condensation must be avoided to maintain insulation integrity and prevent corrosion.
Q: What ingress protection applies to MS2N10-E0BHA-ASAH0-NNNNN-NN?
A: The MS2N10-E0BHA-ASAH0-NNNNN-NN meets IP64 protection, guarding against dust and splashing water. It is not sealed for immersion or high-pressure washdown environments.
Q: Can MS2N10 servo motor operates in outdoor conditions?
A: The MS2N10-E0BHA-ASAH0-NNNNN-NN is intended for indoor use in controlled industrial settings. Exposure to UV, rain, or snow requires additional environmental enclosures.
Q: How does altitude affect MS2N10-E0BHA-ASAH0-NNNNN-NN performance?
A: The operation above 1000 meters reduces cooling efficiency for motor. Derating may be necessary due to thinner air and reduced thermal transfer.
