MS2N10-E0BHA-ASAH0-NNANN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911379669
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-E0BHA-ASAH0-NNANN-NN, part of Bosch Rexroth Indramat's MS2N Synchronous Servo Motors, is a synchronous servo motor with a rated power of 2.5 kW and natural convection cooling. It delivers a rated torque of 8 Nm, operates at a rated voltage of 400 V AC, and includes a holding brake with IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The servo motor MS2N10-E0BHA-ASAH0-NNANN-NN belongs to the MS2N series. It is designed by Bosch Rexroth with size MS2N10 and frame length E for compact machine integration. The configuration is built with low rotor inertia. This supports fast response and controlled acceleration.
The cooling of the MS2N10-E0BHA-ASAH0-NNANN-NN servo motor is achieved through forced ventilation. It requires a voltage supply of 230 V with a 50 to 60 Hz frequency. The encoder operates on an optical principle with 128 signal cycles. It is designed as a multi-turn encoder to ensure accurate position detection and high repeatability. Electrical interfacing is achieved through an M58 plug located on the A-side. This variant is delivered without an integrated holding brake. The motor employs conventional bearings engineered for continuous duty. The MS2N10-E0BHA-ASAH0-NNANN-NN servo motor supports IM B5 mounting arrangement and comes with a built-in PT1000 sensor. The housing is coated in RAL 9005 black paint to enhance durability against environmental stresses. The flange specification includes a 180 mm centering collar to ensure proper alignment. Shaft designation N1007 identifies a plain shaft with a 38 mm diameter and 80 mm length. The servo motor produces 119 Nm of holding torque at a standstill. Its continuous rated torque is 96 Nm at 1800 rpm. The continuous rated output power is 18.1 kW, with a current demand of 37.4 A.
The maximum rated speed of the MS2N10-E0BHA-ASAH0-NNANN-NN servo motor is 4000 rpm. The maximum torque capability of the motor is 234 Nm under cold operation and 214 Nm under warm running conditions. The motor can draw up to 102.5 A at its peak. At 1000 rpm, the back-EMF is 176.4 V. The motor has a torque constant of 2.9 Nm/A. The mechanical limit of the motor reaches 6000 rpm.
Frequently Asked Questions about MS2N10-E0BHA-ASAH0-NNANN-NN:
Q: What is the rated torque of the MS2N10-E0BHA-ASAH0-NNANN-NN motor?
A: The servo motor provides a rated torque of 96 Nm at 1800 rpm. This allows for steady torque delivery in continuous operation conditions.
Q: What encoder type is used in this servo motor?
A: The MS2N10-E0BHA-ASAH0-NNANN-NN integrates a capacitive single-turn encoder with 16 signal periods. This setup supports reliable feedback in closed-loop control systems.
Q: What is the peak torque capability of MS2N10-E0BHA-ASAH0-NNANN-NN?
A: The servo motor can deliver up to 234 Nm cold peak torque. This enables the motor to handle short-term load spikes without damage.
Q: What cooling method is implemented in the motor?
A: The servo motor uses forced ventilation to regulate thermal output under load. This reduces temperature rise and helps maintain continuous torque output.
Q: What is the thermal class of MS2N10-E0BHA-ASAH0-NNANN-NN?
A: The MS2N10-E0BHA-ASAH0-NNANN-NN conforms to thermal class 155 (F) insulation. This rating defines safe winding temperature limits during extended operation cycles.
