MS2N10-D1BNN-DMVG0-NNNNN-NN

Product Description:

Provided by Bosch Rexroth Indramat, this MS2N10-D1BNN-DMVG0-NNNNN-NN synchronous servomotor has a centering collar and a flange of sizes 180 mm and 196 mm, respectively. The motor-associated electrical installation should abide by the EMC directives. This product’s shaft features high-quality, smooth running, along with a shaft-hub connection without play. The device’s non-drive end bearing depicts a 6306 size. This unit’s bearings support 20,000 hours of use with a 90% maximum load factor and S1-100K operating data. Its shaft and shaft seal must always be free of liquid with IM V3 vertical installation. The motor’s sound pressure level is set for a speed ranging from 0 rpm to the rated speed.

This product’s surface must be kept at a considerable distance from temperature-sensitive components. The device’s transportation temperature ranges from -20 °C to 80 °C. This unit’s surface should have no salt mist on it. Its encoder plus temperature sensor has to be handled, taking the ESD safety measures into consideration. The motor shaft isn’t suitable for its pickup. This product’s insulation resistance has to be measured and the windings must be dried at less than 1 kOhm per volt when the storage period crosses 12 months. The device’s cable jacket shouldn’t have any kind of abnormalities. Its transport locks should be taken off prior to its commissioning.

The synchronous servomotor’s assembly must be done on a flat and dry surface. This product’s short coil head reduces its long-term operating costs. The device’s unintended use can result in unfavorable circumstances. This unit’s rating plate has an SI marking. It is mandatory to keep ferromagnetic metal parts away from the permanent magnets of the motor.