MS2N10-D1BNN-CMVK2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914500135
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D1BNN-CMVK2-NNNNN-NN is a synchronous servo motor produced by Bosch Rexroth Indramat. Part of the MS2N Synchronous Servo Motors series, it features a standard, keyed shaft style and a frame size of 10. The motor delivers a rated torque of 10.4 Nm and rated speed of 3000 rpm. It has a protection class of IP65.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Engineered by Bosch Rexroth Indramat, the MS2N10-D1BNN-CMVK2-NNNNN-NN synchronous servomotor always functions with a compatible drive controller. This motor’s heat dissipation takes place through heat conduction in its industrial machine. The product supports up to 75% relative air humidity at 30 °C during transit. The device contains various parts with electrostatic charges. This unit’s flange has mounting holes to ensure its safe mounting. Its holding brake has to be resurfaced after over one month of storage and before the motor is commissioned. This motor portrays a voltage rating higher than 60 V at its connections when the rotor is rotating.
The product’s connectors comprise SpeedCon lock that holds them in place without movement. This device’s plug connections must be connected and/or disconnected only when they are de-energized. The unit’s plug connectors have a circular design with nine poles. Its power connector must be turned in 90° increments. This motor’s surface has a temperature higher than 60 °C in its operation period. The product’s flange sockets have to be connected correctly and safeguarded against coming loose before its commissioning is done. This device’s cooling fins have to be cleaned at regular intervals. The unit’s maintenance isn’t allowed when the machine is in the running state. It is manufactured using resource-optimized production processes.
This synchronous servomotor fails to run if its holding brake has not been released. The product-related permanent magnets are made of rare earth metals. This device’s shaft seal must be replaced when it shows signs of wear. The unit’s connection lines must not be repaired provisionally. It encounters a shutdown due to overheating because of inappropriate cooling.
Frequently Asked Questions about MS2N10-D1BNN-CMVK2-NNNNN-NN:
Q: What happens to the bearings of the MS2N10-D1BNN-CMVK2-NNNNN-NN motor when the operation takes place at impermissibly high temperatures?
A: The bearings of the MS2N10-D1BNN-CMVK2-NNNNN-NN motor get damaged when the operation takes place at impermissibly high temperatures.
Q: How should the MS2N10-D1BNN-CMVK2-NNNNN-NN motor's hot surface be handled?
A: The MS2N10-D1BNN-CMVK2-NNNNN-NN motor's hot surface should be handled only after wearing safety gloves.
Q: Can the MS2N10-D1BNN-CMVK2-NNNNN-NN motor be commissioned by itself?
A: No, the MS2N10-D1BNN-CMVK2-NNNNN-NN motor cannot be commissioned by itself and must be commissioned as a part of the drive system.
Q: What kind of cables are used to connect the MS2N10-D1BNN-CMVK2-NNNNN-NN motor?
A: The manufacturer's readymade cables are used to connect the MS2N10-D1BNN-CMVK2-NNNNN-NN motor.
Q: What must be avoided during the transport of the MS2N10-D1BNN-CMVK2-NNNNN-NN motor?
A: Increased vibrations must be avoided during the transport of the MS2N10-D1BNN-CMVK2-NNNNN-NN motor.
