MS2N10-D1BNN-CMVG2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911385560
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D1BNN-CMVG2-NNNNN-NN synchronous servo motor offers a rated torque of up to 36 Nm, a protection class of IP65, and features a multi-turn absolute encoder with EnDat 2.2. Part of the MS2N Synchronous Servo Motors series by Bosch Rexroth Indramat, it employs natural convection cooling and weighs approximately 21 to 27 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This MS2N10-D1BNN-CMVG2-NNNNN-NN synchronous servomotor by Bosch Rexroth Indramat uses an advanced encoder with an ACUROlink interface for feedback. The motor’s direct operation on a three-phase network is not allowed. This product’s safety documentation had to be read properly before its operation is started. The device needs to always be dry and de-energized when it is worked on. This unit’s permanent magnets generate strong electromagnetic and magnetic fields. Its components must be handled by observing suitable ESD protective measures. This motor’s cooling down is mandatory before touching it after operation.
The product features three phases in its design. This device has standard runout, alignment, and concentricity tolerances as per DIN 42955 specifications. The unit’s shaft features a 38 mm diameter. Its mounting screws feature an 84 Nm tightening torque. This motor’s winding designation is defined by the rated speed. The product’s encoder has a data memory that stores the motor’s threshold values. This device’s encoder’s interface automatically evaluates the temperature of the drive controller. The unit functions with nominal data up to a maximum temperature of 40 °C. It is capable of cooling on its own without additional fittings.
The motor doesn’t have any sealing air connection. This product’s lifting action must be done using the eye bolts on top of the housing. The device caters to diverse automation requirements. This unit’s encoder and temperature sensors have parts that are prone to electrical discharge. Its lifting equipment’s carrying capacity must be adjusted according to the weight of the motor. The synchronous servomotor should be made to run without a load at 800 rpm to 1000 rpm speed for an hour after it has been in storage for more than one year.
Frequently Asked Questions about MS2N10-D1BNN-CMVG2-NNNNN-NN:
Q: Where are the permanent magnets of the MS2N10-D1BNN-CMVG2-NNNNN-NN motor located?
A: The permanent magnets of the MS2N10-D1BNN-CMVG2-NNNNN-NN motor are located in its rotor and holding brake.
Q: When is a bearing replacement needed for the MS2N10-D1BNN-CMVG2-NNNNN-NN motor?
A: A bearing replacement is needed for the MS2N10-D1BNN-CMVG2-NNNNN-NN motor when its storage period is more than 60 months.
Q: What is the maximum allowed duration for the shock load of the MS2N10-D1BNN-CMVG2-NNNNN-NN motor?
A: The maximum allowed duration for the shock load of the MS2N10-D1BNN-CMVG2-NNNNN-NN motor is 11 ms.
Q: What is the protection class of the MS2N10-D1BNN-CMVG2-NNNNN-NN motor?
A: The protection class of the MS2N10-D1BNN-CMVG2-NNNNN-NN motor is IP 65.
Q: What kind of retardants are present in the plastic parts of the MS2N10-D1BNN-CMVG2-NNNNN-NN motor?
A: The plastic parts of the MS2N10-D1BNN-CMVG2-NNNNN-NN motor contain flame retardants.
