MS2N10-D1BNN-CMVG2-NNANN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911376527
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D1BNN-CMVG2-NNANN-NN is a synchronous servo motor with a rated torque of 4.77 Nm and a peak current of 7.5 A. Designed by Bosch Rexroth Indramat for their MS2N Synchronous Servo Motors range, it operates at a rated speed of 2000 rpm and boasts IP65 protection. The motor features natural convection cooling and a singleturn encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This MS2N10-D1BNN-CMVG2-NNANN-NN Bosch Rexroth Indramat synchronous servomotor produces torque continuously when it is utilized in joining or press machines. This motor is always operated with either a ctrlX or an IndraDrive series drive controller. The product’s rated speed depends on the DC bus voltage of the related drive controller. This device’s rated data are present on the type plate. The unit-associated permanent magnets in the rotor must be demagnetized through a special thermal treatment before disposal. Its components have a service life based on their operating conditions. This motor’s shaft seal tends to wear out after 5,000 operating hours.
The product’s holding brake is not a safety brake. The device features suitability for functional safety applications. This unit should at no time be operated directly on any three-phase supply network. It must be worked on by skilled electricians using VDE tools. This motor comprises several electrostatically sensitive components. The product-associated type plate shows its certifications, number of phases, and type designation apart from the main technical data. This device’s time needed for cooling is set according to its thermal time constant. The unit’s installation elevation cannot exceed 3,000 m above sea level. It supports a foreign converter with pulse width modulation and a pulse frequency between 4 kHz and 16 kHz.
The synchronous servomotor’s lifting eye bolts must always be secured in place before their use. The product needs a resurfacing to be done on the holding brake if the storage period exceeds a month. This device can tolerate up to 100 m/s² axial shock load for 11 ms. The unit’s installation is exclusively carried out in industrial machinery. It has a short coil head.
Frequently Asked Questions about MS2N10-D1BNN-CMVG2-NNANN-NN:
Q: When is the MS2N10-D1BNN-CMVG2-NNANN-NN motor considered to be put to inappropriate use?
A: The MS2N10-D1BNN-CMVG2-NNANN-NN motor is considered to be put to inappropriate use if it is operated outside the specified fields of application.
Q: What is the resolution of the encoder of the MS2N10-D1BNN-CMVG2-NNANN-NN motor?
A: The resolution of the encoder of the MS2N10-D1BNN-CMVG2-NNANN-NN motor is 20 bits.
Q: What is the size of the holding brake of the MS2N10-D1BNN-CMVG2-NNANN-NN motor?
A: The MS2N10-D1BNN-CMVG2-NNANN-NN motor has a Size 1 holding brake.
Q: What tools must be used for working on the MS2N10-D1BNN-CMVG2-NNANN-NN motor?
A: VDE tools must be used for working on the MS2N10-D1BNN-CMVG2-NNANN-NN motor.
Q: What happens when temperature-sensitive components come in contact with the hot surface of the MS2N10-D1BNN-CMVG2-NNANN-NN motor?
A: Temperature-sensitive components are susceptible to damage when they come in contact with the hot surface of the MS2N10-D1BNN-CMVG2-NNANN-NN motor.
