MS2N10-D1BFN-CMVK0-NNNNE-NN

Product Description:

Introduced by Bosch Rexroth Indramat, this MS2N10-D1BFN-CMVK0-NNNNE-NN synchronous servomotor’s design includes no holding brake. The motor’s shaft comes with an H marking. This product portrays a displacement of the drive end side of its shaft by 0.6 mm in relation to the housing as a result of thermal expansion. The device’s bearing lifetime determines the motor’s availability to a great extent. This unit’s housing supports an extra varnish coat only after its open connectors, type plates, and safety notes are covered properly. It deploys a flange assembly. The motor uses a steel plate or an aluminum plate when the operation occurs with 100K or 60K data.

This product portrays the ability to tolerate a high load according to the ON time with periodic intermittent operation. The device encounters an overload during continuous operation which may occur if its windings have asymmetrical current. This unit’s drive controller’s controlled or uncontrolled DC bus voltage determines its continuous operating curves. It has an overall length of 296 mm. The product’s operating data are to be reduced when the operating temperature is above 40 °C. This device has no field-weakening operation support with non-compatible drive controllers. The unit’s IndraDrive controller has a 3 x 400 to 480 V line voltage. It has a rated speed according to its drive controller’s DC bus voltage.

The synchronous servomotor’s sizing is done using the IndraSize software. This product’s approvals and certifications can be found on its type plate. The device encompasses metal components made of steel, brass, aluminum, and copper. This unit’s repair is allowed only by authorized personnel. It has three phases and a compact design.