MS2N10-D1BFN-BSVK2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914503546
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D1BFN-BSVK2-NNNNN-NN is a high inertia synchronous servo motor with a typical rated power of 8.0 kW. Manufactured by Bosch Rexroth Indramat as part of the MS2N Synchronous Servo Motors series, it features a D-length motor design. Its max speed reaches up to 6000 min⁻¹, and rated torque ranges from 19.1 Nm to 55 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N10-D1BFN-BSVK2-NNNNN-NN synchronous servomotor engineered by Bosch Rexroth Indramat is operated in a drive system with its compatible drive controller. This product isn’t recommended for use in explosion-hazardous locations. The device features the integration of a holding brake that is free of backlash. This unit’s flange accuracy defines its runout, concentricity, and alignment tolerances. It features Level A oscillation quantity up to its nominal speed. This motor’s bearings’ life depends on the life of the grease on them.
The product’s shaft is subject to radial forces in the operating period. This device’s drive side can face up or down with an upright installation. The unit’s jet black RAL 9005 coat on the housing is a water-based varnish. Its cables must be replaced if they are damaged. This motor lacks an air pressure connection. The product also doesn’t have an extra ground connection. This device utilizes a thermally insulated 300 x 270 x 15 mm (L x W x H) aluminum plate to support operation with 60K data. The unit’s 100K operating characteristic curves highlight the permissible motor winding limits during continuous operation. Its encoder encompasses 128 signal periods.
This motor’s type plate portrays the China RoHS 2 conformity. The product’s design portrays a high content of metal. This device’s sealing ring needs to be inspected regularly. The unit needs some measures to be adopted before commissioning after an extended storage period. Its storage is permitted only in a dry and cool room. This synchronous servomotor’s eye bolts are located in alternating positions and have to be tightened to be seated firmly before their use.
Frequently Asked Questions about MS2N10-D1BFN-BSVK2-NNNNN-NN:
Q: How many signal periods does the encoder of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor have?
A: The encoder of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor has 128 signal periods.
Q: When does the holding brake of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor open?
A: The holding brake of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor opens when the switching voltage is applied.
Q: How is the inductive load of the brake of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor switched?
A: The inductive load of the brake of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor is switched by a protective circuit in the drive controller.
Q: What is the shaft diameter of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor?
A: The shaft diameter of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor is 38 mm.
Q: Where is the flange of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor attached?
A: The flange of the MS2N10-D1BFN-BSVK2-NNNNN-NN motor is attached on the drive side.
