MS2N10-D1BFN-BSVK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911398817
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D1BFN-BSVK0-NNNNN-NN synchronous servo motor delivers a rated power of 4.1 kW, a rated torque of 16 Nm, a rated speed of 3000 rpm, and features an IP65 protection class. Part of the MS2N Synchronous Servo Motors series manufactured by Bosch Rexroth Indramat, it utilizes surface cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N10-D1BFN-BSVK0-NNNNN-NN synchronous servomotor offered by Bosch Rexroth Indramat has been listed as an IndraDyn S motors. This motor’s excitation takes place using permanent magnets. The product incorporates a square mounting frame. This device’s bearings support 20,000 operating hours when it operates with 100K data and has a maximum load factor of 90% during the runtime. The unit is balanced with a 10 x 8 x 70 key. It supports a maximum allowed shock load of 100 m/s² for 11 ms. This motor’s associated permanent magnets can trigger health hazards if people with metallic aids make contact with them.
The product portrays no adverse influence on its surroundings when it is used. This device has been designed such that it supports flange assembly. The unit’s ambient installation altitude varies from 0 to 1000 m over sea level. It cannot be operated when there is an extreme temperature fluctuation. This motor’s rating plate has the technical data needed for service. The product features a 140 °C warning temperature. This device features a lowered dissipation of heat because of dust and dirt on its surface. The unit’s encoder features a Hiperface interface. Its shaft’s keyway design permits only low shaft-hub connection requirements.
This synchronous servomotor’s half key balancing complies with DIN ISO 21940-32 specifications. The product type and the installation machine’s construction must be adapted to each other to avoid exceeding the bearing and shaft load limits. This device’s drive elements have to be mounted using axially compensated couplings when possible. The unit might feature vibrations because of poor balancing of its couplings. Its plastic parts must be recycled or disposed separately.
Frequently Asked Questions about MS2N10-D1BFN-BSVK0-NNNNN-NN:
Q: When does the shaft sealing ring of the MS2N10-D1BFN-BSVK0-NNNNN-NN motor show signs of wear?
A: The shaft sealing ring of the MS2N10-D1BFN-BSVK0-NNNNN-NN motor shows signs of wear after 5,000 operating hours.
Q: What determines the service life of the components of the MS2N10-D1BFN-BSVK0-NNNNN-NN motor?
A: The service life of the components of the MS2N10-D1BFN-BSVK0-NNNNN-NN motor is determined by its operating conditions.
Q: What check should be done before the MS2N10-D1BFN-BSVK0-NNNNN-NN motor is installed and operated?
A: The MS2N10-D1BFN-BSVK0-NNNNN-NN motor should be checked for damage or defect before it is installed and operated.
Q: How should the carrying capacity of the lifting equipment used with the MS2N10-D1BFN-BSVK0-NNNNN-NN motor be adjusted?
A: The carrying capacity of the lifting equipment used with the MS2N10-D1BFN-BSVK0-NNNNN-NN motor should be adjusted according to its weight.
Q: Where is the H marking found on the MS2N10-D1BFN-BSVK0-NNNNN-NN motor?
A: The H marking is found on the base of the recess or the shaft front end of the MS2N10-D1BFN-BSVK0-NNNNN-NN motor.
