MS2N10-D1BFN-BMVG2-RNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911395458
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D1BFN-BMVG2-RNNNN-NN servo motor delivers a rated power of 1.5 kW and a rated torque of 4.8 Nm. Manufactured by Bosch Rexroth Indramat in their MS2N Synchronous Servo Motors series, it operates at a rated voltage of 400 V with an IP65 protection class. The motor features natural cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N10-D1BFN-BMVG2-RNNNN-NN synchronous servomotor provided by Bosch Rexroth Indramat has to be installed using the manufacturer’s preassembled cables. This motor’s de-energization and grounding are needed before any repair or service is undertaken. The product-associated holding brake is controlled by the drive controller. This device’s covers should be installed on the dangerous rotating parts before it is started. The unit needs cooling for the specified time before touching it after its use. It must be taken care to avoid direct contact with the open wires of the connection cable of its temperature sensors without proper electrostatic discharging. This motor’s type plate lists its certifications and approvals.
The product features Class F insulation. This device’s flange depicts increased exactness. The unit’s Side B is referred to as the non-drive end. Its shaft features a diameter of 38 mm. This motor’s mounting screws comply with DIN EN ISO 4762 or DIN EN ISO 4014 specifications. The product also uses washers to assist in the mounting process. This device is integrated with a standard PT1000 temperature sensor. The unit and its adjacent components must be separated by at least 100 mm to ensure unhindered vertical convection. Its encoder fulfills SIL 2 specifications.
This synchronous servomotor’s encoder features 128 signal periods. The product’s sealing ring has to be inspected at regular intervals. The device’s drive end side of the shaft tends to be displaced by up to 0.6 mm with respect to its housing because of thermal expansion. This unit needs a 24 VDC voltage with +/-10% tolerance for safe switching of its holding brake. Its readymade connection cables support a maximum length of 75 m.
Frequently Asked Questions about MS2N10-D1BFN-BMVG2-RNNNN-NN:
Q: What is the voltage rating of the holding brake of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor?
A: The voltage rating of the holding brake of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor is 24 VDC +/-10%.
Q: What is the maximum operating temperature of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor?
A: The maximum operating temperature of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor is 60 °C.
Q: What should the pulse frequency of the converter of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor be?
A: The pulse frequency of the converter of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor should be between 4 kHz and 16 kHz.
Q: What is the transport temperature of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor?
A: The transport temperature of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor is -25 °C to 70 °C.
Q: When should the protective covers of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor be removed?
A: The protective covers of the MS2N10-D1BFN-BMVG2-RNNNN-NN motor should be removed just before assembly.
