MS2N10-D1BFB-CMVH2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914502730
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D1BFB-CMVH2-NNNNN-NN servo motor, part of Bosch Rexroth Indramat's MS2N Synchronous Servo Motors, features a 140 mm flange and natural convection cooling. It delivers a rated power of 1.7 kW and a speed of 1500 rpm. The motor has IP65 protection and a multiturn absolute encoder for precision.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N10-D1BFB-CMVH2-NNNNN-NN is an advanced synchronous motor designed to meet the high accuracy and torque requirements of a broad range of industrial machines such as paper processing, packaging, and textile machines. The motor is a Bosch Rexroth Indramat product, it operates with an advanced multi-turn encoder that operates with the internationally renowned ACURO link protocol that helps it to maintain a functional resolution of 20 bits. The number of distinguishable rotations for this encoder is about 4,096 while its maximum current consumption is about 60 milliampere. The MS2N10-D1BFB-CMVH2-NNNNN-NN has a forced ventilation design which includes a fan that aids its normal temperature regulation system. The fan requires a voltage supply of 115 volts, and a minimum distance of about 80 millimeters should also be allowed around the motor to allow for easy air circulation around the motor unit.
The enclosure of the MS2N10-D1BFB-CMVH2-NNNNN-NN belongs to the IP64 category and will easily withstand common environmental interference like dust and water splashes; however, contaminated environments should be avoided, as that can accumulate on the fan, reduce its flow rate and ultimately increase the thermal overload of the motor. There is a thermistor installed in the motor winding to serve as a temperature sensor for the motor. This thermistor, together with the temperature module, ensures that the motor is securely protected against thermal overload.
The MS2N10-D1BFB-CMVH2-NNNNN-NN motor shaft is a smooth shaft with no shaft sealing ring. It also features a holding brake designed to retain loads connected to its output shaft. The electrical connection on this product is a M40 tunable single plug located on top of its housing unit for easy wiring during installation. The MS2N10-D1BFB-CMVH2-NNNNN-NN has a standard black coating that is resistant to water and other common non-corrosive liquids.
Frequently Asked Questions about MS2N10-D1BFB-CMVH2-NNNNN-NN:
Q: What type of encoder is present inside this product?
A: This motor uses an advanced multi-turn encoder. This encoder operates at 2048 signal periods, and a 20 bit resolution.
Q: What does the holding brake built-into this product do?
A: The installed holding brake helps to retain loads connected to the motor shaft when the motor is at a standstill.
Q: Is this motor coated?
A: There is a standard black varnish on the MS2N10-D1BFB-CMVH2-NNNNN-NN motor. This varnish protect the motor housing against liquids like water, mineral oil, and dilute acids.
Q: What type of magnet is used in this motor?
A: The MS2N10-D1BFB-CMVH2-NNNNN-NN operates with neodymium-iron-boron magnet.
Q: What is the typical operation speed for this product?
A: During standard operation, the MS2N10-D1BFB-CMVH2-NNNNN-NN operates at a typical speed of 1500 revolutions per minute, however it can reach a peak speed of 6000 revolutions per minute.
