MS2N10-D1BFB-BMVG0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501621
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D1BFB-BMVG0-NNNNN-NN is a synchronous servo motor with a frame size of 10 and a rated power of 4.0 kW. Manufactured by Bosch Rexroth Indramat as part of the MS2N Synchronous Servo Motors series, it operates at 400 V. This motor features IP65 enclosure, 13 Nm rated torque, and natural convection cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N10-D1BFB-BMVG0-NNNNN-NN is a sophisticated motor design that combines with compatible drive controllers to form an intelligent system able to easily meet the industrial requirements of several production and processing applications. This motor is a product of Bosch Rexroth Indramat, it is an internationally renowned product that has been tested and certified to meet the highest quality and safety standards. The motor contains a special neodymium-iron-boron magnetic material responsible for its ability to maintain an average inertial level and high efficiency during operation. This unit is cooled by forced ventilation; it features a built-in axial fan responsible for the easy flow of cool air inside its housing. The fan operates with a voltage of about 115 volts. The encoder present inside this motor is a standard multi-turn encoder with high resolution and about 128 signal periods. The encoder also operates according to the Hiperface protocol.
The MS2N10-D1BFB-BMVG0-NNNNN-NN motor features a double rotatable electrical connection interface installed on its housing. This connection design makes the wiring and installation of the motor relatively easy and straightforward. The rated torque of this motor during operation is about 41.7 newton meters, at a maximum current of 54.1 amperes, the motor will deliver a maximum torque of between 84 to 92.5 newton meters while operating at a peak speed of 6000 revolutions per minute. There are about 5 pole pairs in this motor; these pole pairs make it possible to generate relatively high torque at low speed.
The MS2N10-D1BFB-BMVG0-NNNNN-NN synchronous motor is protected by a black varnish that is resistant to common liquids like dilute acids, dilute alkali, and mineral oils. Customers can apply an additional layer of varnish; however, this should not have a thickness higher than 40 micrometers.
Frequently Asked Questions about MS2N10-D1BFB-BMVG0-NNNNN-NN:
Q: What type of electrical connection is used in this motor?
A: The MS2N10-D1BFB-BMVG0-NNNNN-NN is equipped with the M40 angle plug present on its housing.
Q: What type of cooling system does this motor use?
A: There is a fan built into this motor. The fan ensures its efficient cooling through forced ventilation.
Q: What is the service life of the ball bearings present in this motor?
A: Integrated ball bearings have a typical service life of between 20,000 to 30,000 hours.
Q: Is the MS2N10-D1BFB-BMVG0-NNNNN-NN delivered with an holding brake?
A: There is no holding brake in this motor.
Q: What is the inertial level of this product?
A: The MS2N10-D1BFB-BMVG0-NNNNN-NN is a low inertial device.
