MS2N10-D1BFA-CSVK2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911394764
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D1BFA-CSVK2-NNNNN-NN by Bosch Rexroth Indramat is part of the MS2N Synchronous Servo Motors series and features a rated power of 5.7 kW. This motor offers a rated torque of 18.2 Nm and a rated speed of 3000 rpm. It features IP65 protection, natural convection cooling, and a rotatable connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N10-D1BFA-CSVK2-NNNNN-NN is a synchronous motor that contains neodymium iron magnets and is widely popular among industrial engineers for its low inertia and high level of accuracy during operation. The motor is built by Bosch Rexroth Indramat. Unlike conventional machines, it comes with a strong enclosure and is able to maintain an efficiency level as high as 95 per cent in harsh conditions. This motor is an air-cooled device that features an air blower, which ensures the flow of cool air in and around its housing. The permissible ambient temperature for this servo motor unit is between 0 to about 45 degrees. At a standstill, this industrial motor requires a current supply that is between 5.45 to about 6.9 amperes; its standstill torque output can also be as high as 23.9 newton meters. However, during rated operation, the motor operates at a speed of 1500 revolutions per minute and produces a rated torque of 20.9 newton meters.
The MS2N10-D1BFA-CSVK2-NNNNN-NN synchronous motor features a thermistor installed inside its winding to help drive controllers detect high ambient temperature and alert the operators. The threshold value for the motor thermistor is about 145 degrees Celsius. There are about 5 pole pairs in this industrial motor; its torque constant at a temperature of 20 degrees is measured to be about 3.73 newton meters per ampere.
The MS2N10-D1BFA-CSVK2-NNNNN-NN synchronous motor features an advanced single turn encoder; it also has a built-in holding brake that retains any load connected to its output shaft when it is at a standstill. The output shaft present in this servo motor features a keyway with a shaft sealing ring. This keyway aids the smooth transmission of torque from the motor to machine components without relative movement.
Frequently Asked Questions about MS2N10-D1BFA-CSVK2-NNNNN-NN:
Q: How is the MS2N10-D1BFA-CSVK2-NNNNN-NN cooled?
A: This motor is a forced cooled device. It is equipped with an axial air blower for the cooling process.
Q: What level of inertial does this motor maintain during operation?
A: The MS2N10-D1BFA-CSVK2-NNNNN-NN is an average inertial device.
Q: Is there a holding brake attached to this motor?
A: Yes. This motor features a reliable holding brake that retains loads connected to the motor shaft when it is at a standstill.
Q: What type of bearing is installed inside this motor?
A: The MS2N10-D1BFA-CSVK2-NNNNN-NN comes with standard ball bearings with service life of between 20,000 to 30,000 hours.
Q: What is the maximum possible operation speed for this motor?
A: Under standard conditions, this synchronous motor can reach a peak speed of 6000 revolutions per minute.
