MS2N10-D1BFA-BSVK0-NNNNN-NN

Product Description:

The MS2N10-D1BFA-BSVK0-NNNNN-NN from Bosch Rexroth Indramat fits into the MS2N Synchronous Servo Motors lineup and comes designed for jobs that need controlled precision and reliable long runtimes. This version mounts by flange and runs with natural convection cooling to take heat away quietly, important in automation setups where sound and air movement sometimes need to stay low. As far as stats go, rated power reaches 1.05 kW with a 400 V rated voltage backing it up. The combination there helps with mid-sized loads and moderate speeds, covering a broad section of industrial needs. The highest torque peaks at 10.2 Nm, so quick bursts aren't a problem.

Maximum speed numbers reach 6000 rpm to cover functions that call for a good range in movement. For steady, shorter cycles or regular small lifts, the continuous stall torque sits at 3.38 Nm while the rated torque is 3.35 Nm. In day-to-day work, the rated speed checks in at 3000 rpm to keep things steady without a lot of risk to the windings or bearings. Sensor feedback comes from a single-turn absolute encoder (21 bit) that tells automation controllers exactly where the shaft lines up, even after power off. Protection is taken care of by IP65, so built-up dust or some water spray won't shift its performance or damage the insides.

The design follows up with materials and mounting details focused on long-term use. Weight stays manageable, and compact mounting options let it slide straight into machines without realignment troubles. The external body handles typical plant dust, so maintenance checks aren’t too frequent. With a rated current of 2.8 A for standard operations, there’s no special wiring—just standard practices for servo installations. Most often, this servo motor drops into automated lines, parts assembly, or transport setups, moving precisely and lasting through repeated full shifts.