MS2N10-D0BNN-DMVG2-NNNNN-NN

Product Description:

The MS2N10-D0BNN-DMVG2-NNNNN-NN falls under the MS2N Synchronous Servo Motors line from Bosch Rexroth Indramat and uses a direct synchronous servo setup for precision-driven automation. With a rated power of 3.7 kW and rated speed of 3000 rpm, the motor operates consistently for drive systems that demand steady, controlled movement. The flange size comes out at 140 mm, which slots this model into medium-sized machinery or production setups. Thermal protection is integrated right inside the motor housing, so winding temperature gets managed as soon as it starts to climb.

The multi-turn (SIL3) digital encoder built into this motor allows applications that rely on repeatable accuracy and safe feedback to work without interruption. That feedback system ensures even in complex routines, positional data doesn’t lag or fall out of alignment, which matters in automated lines or robotics. IP65 protection covers the whole frame to keep out dust, fine particles, and jets of water—this helps retain motor strength and responsiveness over time, even if the workspace gets messy. For supply, a rated voltage of 400 V feeds the windings, and the rated current of 8.1 A gives clear parameters for drive electronics or inverters to stay within expected limits. Installation benefits from the size and class with the motors dropping onto typical servo frames using the set 140 mm flange and established mounting patterns.

Bosch Rexroth’s intention with the MS2N10-D0BNN-DMVG2-NNNNN-NN is steady operation during long shifts — so structural elements and inputs, including the digital encoder, point at automation setups that can’t afford interruptions. Industrial facilities turn to this model specifically for motion axes that don’t tolerate drift or timing errors. Integrated temperature sensing avoids loss of torque from excessive heat, while overall design matches up with drives and controllers from existing Rexroth automation groups.