MS2N10-D0BNN-CSVL2-NNNNN-NN

Product Description:

The MS2N10-D0BNN-CSVL2-NNNNN-NN from Bosch Rexroth Indramat comes out of the MS2N Synchronous Servo Motors lineup and aims for motion tasks needing tight control and steady movement. Its rated speed hits 3000 rpm, pairing with a rated torque of 10 Nm, which suits drives and machines with regular load changes. On voltage, the class runs at 400 V for good compatibility on automated lines and industrial platforms. The frame size 2 (size 10) offers a profile that fits common setups, and the total build sits close to other motors in the series for easy swapping if needed.

Wrap the housing, and a solid IP65 protection keeps water spray and small debris out, making installation in less-than-clean plants less risky. Feedback gets handled by the IndraDyn S multi-turn absolute encoder, and that’s key for where position accuracy sparks concern and reduces drift during repeat cycles. The natural cooling group joins with surface cooling if heat needs moving out faster; the design keeps power density balanced while noise and vibration stay dialed back. Full torque remains available over long runs, helped by a peak torque value climbing to 30 Nm for surprise loads or shifts.||Connections finish with an axial plug connector, built solid for Industrial Automation conditions. Each unit is rated at 2.4 kW output and draws around 7.5 A at nominal pace, with maximum current marked 20 A for brief surges. There’s no holding brake added, so setups needing one will need to spec that separately. The cable routing takes place through slip-safe connections, and sensors are in place for speed, position, and overload. Usual fits land in conveyor drives, robotic joints, or cellular manufacturing stations, especially where maintenance breaks need to be short and reliability matters.