MS2N10-D0BNN-BSVK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911388123
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D0BNN-BSVK0-NNNNN-NN synchronous servo motor features a motor size of 10, IP65 protection class, and peak torque of up to 27.5 Nm. Part of the MS2N Synchronous Servo Motors series by Bosch Rexroth Indramat, it employs natural convection cooling and supports operating temperatures from -20°C to +40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat designed MS2N10-D0BNN-BSVK0-NNNNN-NN in the MS2N series identifies a synchronous servo motor that slots into standardized platforms and simplifies multi-axis selection. The motor size "10" footprint fits compact machines and keeps inertia predictable for precise axis tuning. The D0BNN feedback type provides absolute position data, so the controller restores exact shaft angle after power cycling and avoids homing moves.
Standard mounting through a square flange aligns the motor to common gearheads and frames so installation time stays low, and rigidity remains consistent. The BSVK0 voltage class targets a 400-volt environment and lets the drive deliver rated performance without oversized insulation. Absence of a holding brake removes drag during fast direction changes and reduces wear in duty cycles that rely on active servo holding. The IP65 protection class seals against dust and low-pressure water jets so the enclosure tolerates washdown and airborne contaminants. Natural convection cooling moves heat to the housing and maintains output without auxiliary fans in clean layouts.
The MS2N10-D0BNN-BSVK0-NNNNN-NN uses a rotatable plug connector so cable exit can be oriented for tight cabinets and reduced bend stress. A maximum motor speed up to 6000 rpm supports high surface velocities in feed axes where rapid traverse shortens cycle time. Peak torque up to <>27.5 Nm>> covers short overload events and lets the axis clear static friction before settling. Continuous torque in the typical 5–15 Nm range sustains steady cutting or indexing while keeping winding temperatures within class limits. An operating range from −20°C to +40°C maintains rated behavior in common factory climates and prevents derating in unconditioned shops.
Frequently Asked Questions about MS2N10-D0BNN-BSVK0-NNNNN-NN:
Q: What does motor size imply for the MS2N10-D0BNN-BSVK0-NNNNN-NN?
A: The motor size 10 defines frame and shaft geometry so couplings and gearheads match without adapters. This motor size also sets inertia bands that help tune control loops for stable response.
Q: How does the feedback system influence restart behavior on the MS2N10-D0BNN-BSVK0-NNNNN-NN?
A: The feedback type DOBNN is an absolute encoder that reports position after power restoration. The DOBNN configuration removes the need for a homing move and shortens recovery time.
Q: Why is the mounting approach relevant to precision on the MS2N10-D0BNN-BSVK0-NNNNN-NN?
A: The standard square flange mounting keeps the interface stiff and planar for alignment. The standard mounting pattern fits common frames so parallelism and concentricity remain controlled.
Q: How does the MS2N series designation guide commissioning for MS2N10-D0BNN-BSVK0-NNNNN-NN?
A: The series identifier MS2N standardizes motor behavior and documentation within Bosch Rexroth. It also ensures parameter sets and accessories align quickly for predictable drive setup.
Q: How does the voltage classification affect drive pairing for the MS2N10-D0BNN-BSVK0-NNNNN-NN?
A: The "BSVK0" voltage class corresponds to a 400 V environment used by many servo drives. The BSVK0 rating lets insulation and winding design match typical industrial mains for efficient operation.
