MS2N10-D0BNB-BMAK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914000555
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D0BNB-BMAK0-NNNNN-NN synchronous servo motor delivers a continuous torque of 13 Nm, a peak torque of 52 Nm, a rated speed of 3000 rpm, and utilizes natural convection cooling. Part of the MS2N Synchronous Servo Motors series by Bosch Rexroth Indramat, it features an IP65 protection class for reliable operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N10-D0BNB-BMAK0-NNNNN-NN servo motor features a flange size of 196 mm and a spigot size of 180 mm. The servo motor is compatible with industrial computer systems and provides adequate torque, speed, and control. The motor is not designed with a stopping brake.
The MS2N10-D0BNB-BMAK0-NNNNN-NN servo motor can reach a top speed of 6000 rpm and a maximum torque of 155.0 Nm. When the internal temperature is 60k and the standstill torque is 55.0 Nm, it goes up to 82.4 Nm when both the internal and outdoor temperatures are 100k. The motor has a forced air system with a 115 V axial fan that helps keep the temperature stable. The shaft is made with a 38 mm diameter, a keyway and a shaft seal built into it. The bolt circle is 215 mm in diameter, which makes the structure stable. Because the shaft is 80 millimeters in length, it is suitable for a wide variety of drive applications. Managing the electrical contact on the A-side is the responsibility of an angle connector M58. A rotational inertia of 0.0081 kg/m2 is observed in the absence of the stop. This means that the motor can be employed for tasks requiring fast acceleration or deceleration.
The MS2N10-D0BNB-BMAK0-NNNNN-NN servo motor has a multiturn encoder that can handle 4,096 absolute turns and allows Hiperface communication with 128 signal periods. SIL2 and PL d safety standards are met by the encoder. The motor is protected by IP65 standards and has attachment holes made for M12 shafts. Because of these requirements, the motor will work reliably and be easy to handle. The MS2N servo motor is designed to work reliably and always work with other parts.
Frequently Asked Questions about MS2N10-D0BNB-BMAK0-NNNNN-NN:
Q: How does the MS2N10-D0BNB-BMAK0-NNNNN-NN servo motor benefit from low rotor inertia?
A: Low rotor inertia allows fast response. It improves acceleration and deceleration. This makes the motor suitable for dynamic applications. The feature supports better control of load changes during operation.
Q: Why does the MS2N10-D0BNB-BMAK0-NNNNN-NN servo motor use forced ventilation cooling?
A: Forced ventilation cooling maintains a consistent motor temperature. The axial fan at 115 V prevents overheating. It enables longer operating cycles. This improves efficiency and ensures stable performance under higher loads.
Q: Does the MS2N10-D0BNB-BMAK0-NNNNN-NN servo motor have multiturn encoder advantages?
A: Yes, the multiturn encoder provides 4,096 absolute revolutions. It maintains accurate position feedback. This allows precise control without resetting. The encoder enhances safety compliance with SIL2 and PLd standards.
Q: Why does MS2N10-D0BNB-BMAK0-NNNNN-NN servo motor offer both internal and external cooling torque values?
A: The two torque values specify performance with different cooling setups. Internal cooling achieves 55 Nm at 60k. Combined internal and external cooling increases torque to 82.4 Nm at 100k.
Q: How does MS2N10-D0BNB-BMAK0-NNNNN-NN servo motor ensure a secure electrical connection?
A: The angle connector M58 positioned on the A-side ensures tight electrical coupling. It provides reliable power and signal transfer. This prevents disconnections. It also supports easy installation and maintenance operations.
