MS2N10-D0BNA-DSAG2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911386258
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N10-D0BNA-DSAG2-NNNNN-NN is a synchronous servomotor with a frame size of 10 and a rated speed of 3000 rpm. Manufactured by Bosch Rexroth Indramat as part of the MS2N Synchronous Servo Motors series, it offers a rated torque of 35 Nm. The motor provides IP65 protection and features a Hiperface DSL Singleturn encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N10-D0BNA-DSAG2-NNNNN-NN is a Bosch servo motor. Its nominal speed is 3000 RPM. Before handling it, operators and their staff must fully understand all manufacturer instructions related to operations and safety. This motor carries high voltages and currents, which pose a serious threat to human health. Only qualified technical personnel should connect power wiring to the motor. Its surface temperature can exceed 60 ⁰C, and proper precautions are necessary for avoiding accidental contact. A sufficient wait time is necessary to allow the motor to cool down before any repair or maintenance is performed. The motor uses permanent magnets. Therefore, staff must ensure they leave ferromagnetic parts, including cards and watches, away from the motor. Proper identification of the motor is important, and Bosch has provided a type plate on the unit for this purpose. Operators can refer to the type plate whenever required.
MS2N10-D0BNA-DSAG2-NNNNN-NN is a motor with forced ventilation. A factory-installed axial fan provides cooling to help maintain ambient temperature within recommended limits, which is 0 to 40 ⁰C. This fan requires 230 Volts external power. MS2N motors support a range of feedback options, and this motor is equipped with a high-performance singleturn encoder with 24-bit resolution. Another important motor feature is a holding brake. This brake opens when the 24 Volts DC switching voltage is applied. It is rated for more than 5 million operating cycles. These brakes are only to be used to secure the motor shaft at standstill, and must not be used to reduce the shaft speed during routine operations. The smooth shaft on the MS2N10-D0BNA-DSAG2-NNNNN-NN motor includes a seal. Protection class of the motor is IP65 and it weighs approximately 40 kilograms.
Frequently Asked Questions about MS2N10-D0BNA-DSAG2-NNNNN-NN:
Q: Which type of fan is installed on the motor?
A: An axial fan is installed on the motor.
Q: What is the power supply of the fan?
A: The fan requires 230 Volts power supply.
Q: Is a holding brake installed on the motor?
A: A holding brake is installed on the motor.
Q: What is the motor mass?
A: Mass of the motor is 40 kilograms.
Q: What is the brake's holding torque?
A: Holding torque of the brake is 53 Nm.
