Product Description:

The MS2N07-D1BNN-BSUG0-NNNN-NN is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MS2N Synchronous Servo Motors series. It converts controlled current from a servo drive into precise rotary motion required for positioning tables, packaging stations, and articulated robots in automated lines. This operating principle supports accurate speed and position control during repetitive machine cycles. The motor follows a B5 / IM3001 flange layout so it integrates with standard machine frames without additional adapter plates.

For thermal management, the motor relies on self-cooling, so the housing surface alone dissipates losses during continuous duty. Its nominal operating point is a rated speed of 3000 rpm, enabling direct coupling to mid-speed mechanisms without resorting to reduction gears. Position feedback comes from a single-turn absolute encoder that provides 128 Hiperface signal periods per revolution for digital control loops. Power and feedback conductors exit through a double cable connection with M23 and M17 connectors that can be rotated to match the cable track orientation. The unit is supplied without a holding brake, making it suited to axes where static holding torque is provided by the drive or external clamps.

Mechanical integrity is supported by a standard bearing arrangement that holds radial and axial loads within rated limits while maintaining low vibration. Exterior metal parts receive a RAL 9005 black varnish that offers basic corrosion protection and also acts as an insulating layer. Dynamic response is moderated by an average-inertia rotor, which balances high acceleration with stable runout for moderate load masses. A smooth shaft with a sealing ring keeps grease inside the bearing chamber and blocks dust ingress, simplifying installation with clamping hubs. The motor has frame length D, standard flange accuracy, and a PT1000 winding sensor for temperature monitoring during operation.