Product Description:

The MS2N07-D0BRN-CMVG0-NNANN-NN is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MS2N Synchronous Servo Motors series. It converts electrical energy into precisely controlled rotary motion, allowing CNC tables, pick-and-place arms, and forming presses to follow programmed position, velocity, and acceleration profiles under closed-loop control. The motor is used where fast response and accurate feedback are needed to maintain product quality and machine throughput.

The motor uses a standard bearing arrangement and has a standard varnish in RAL 9005 black for surface protection. It uses self-cooling and a smooth shaft with a sealing ring, which supports cabinet-free mounting. The rotatable double cable connection M40/M17 allows power and ACURO®Link feedback to exit in any radial direction. Position data are supplied by an advanced 20-bit multiturn encoder that resolves up to 4,096 absolute revolutions. The motor delivers a continuous torque of 14.7 Nm at 4,500 rpm, producing 4.64 kW of mechanical power. At standstill, the rotor can sustain 28.2 Nm, while short intervals permit peaks of 73.2 Nm. Frame length D, standard flange accuracy, and the MS2N07 size code keep the package compact, and low rotor inertia supports aggressive acceleration profiles. The motor is supplied without a holding brake.

Electrical loading is limited to a rated current of 12.15 A during continuous duty, a standstill current of 22.3 A at a winding temperature rise of 100 K, and peak current that reaches 72.7 A in dynamic cycles. These values align the motor with common servo inverters so the available torque can be reached without excess heating. The installation weight is 17.5 kg, which suits medium-mass gantries while also helping reduce vibration. Correct sizing of supply cables and fuses to these current levels helps preserve encoder signal stability and supports long service life.