MS2N07-D0BNN-CMSL0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384055
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-D0BNN-CMSL0-NNNNN-NN is a flange-mounted synchronous servo motor with a rated torque of 3.2 Nm and a maximum speed of 6000 rpm. Manufactured by Bosch Rexroth Indramat under the MS2N Synchronous Servo Motors, it features IP65 protection and self-cooled operation. It also includes a singleturn EnDat 2.2 encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Produced by Bosch Rexroth Indramat, this MS2N07-D0BNN-CMSL0-NNNNN-NNsynchronous servomotor’s Side B is referred to as the non-drive end. The motor’s shaft comprises a cylindrical shaft end. This product’s matching key is to be procured separately. The device’s feedback plus power connections are established with a single connector. This unit’s drive controller has high-frequency discharge currents in the motor cable. It is connected using the manufacturer’s readymade cable. The motor’s ambient climatic conditions are defined as per DIN EN 60721 specifications.
This product’s performance has to be reduced when the ambient limits are exceeded. The device comprises no shaft seal. This unit’s encoder complies with ACURO(r)Link protocol. It can be coated with additional varnish with a maximum thickness of 40 µm. The motor’s typical sound pressure level is specified for a speed ranging from 0 rpm to its rated speed. This product’s shaft must always be kept free of liquid around it. The device utilizes a non-thermally insulated 450 x 370 x 30 mm (L x W x H) steel plate for operation with 100K data. This unit’s thermal installation determines its power loss. It supports continuous and intermittent operating modes.
The motor tends to get overloaded during continuous operation when it produces torque continuously. This product’s S1 continuous operation curves are based on the DC bus voltage of its drive controller. The device’s rated data are specified on its type plate. This unit’s maximum torque is based on the associated drive controller. Its floating bearing supports axial offsets to avoid cross-location. The synchronous servomotor’s conformity to UL/CSA standards can be found on its type plate.
Frequently Asked Questions about MS2N07-D0BNN-CMSL0-NNNNN-NN:
Q: Where should the MS2N07-D0BNN-CMSL0-NNNNN-NN motor be stored?
A: The MS2N07-D0BNN-CMSL0-NNNNN-NN motor should be stored in dry and rainproof rooms.
Q: How are the permanent magnets of the MS2N07-D0BNN-CMSL0-NNNNN-NN motor demagnetized?
A: The permanent magnets of the MS2N07-D0BNN-CMSL0-NNNNN-NN motor are demagnetized by a special treatment.
Q: What product group does the MS2N07-D0BNN-CMSL0-NNNNN-NN motor belong to?
A: The MS2N07-D0BNN-CMSL0-NNNNN-NN motor belongs to the manufacturer's IndraDyn S product group.
Q: What is the protection class of the MS2N07-D0BNN-CMSL0-NNNNN-NN motor?
A: The protection class of the MS2N07-D0BNN-CMSL0-NNNNN-NN motor is IP 64 as per EN 60034-5 specifications.
Q: What determines the length of the screws used with the MS2N07-D0BNN-CMSL0-NNNNN-NN motor?
A: The length of the screws used with the MS2N07-D0BNN-CMSL0-NNNNN-NN motor depends on the assembly situation and the material of the screw.
