MS2N07-D0BNN-CMSG0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911384632
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N07-D0BNN-CMSG0-NNNNN-NN is a high-performance motor in the MS2N Synchronous Servo Motors series, featuring a frame size of 07. It operates with natural convection cooling, an IP65 protection class, and delivers a rated torque of 4.6 Nm. The motor achieves a maximum speed of 6000 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch MS2N07-D0BNN-CMSG0-NNNNN-NN acts a synchronous motor. It is a high-performance drive. It is a part of the Bosch MS2N series. It was designed to work well and accurately in tough automation settings. The motor can reach speeds of up to 6000 rpm and has a rated torque of 4.6 Nm.
This makes it good for tasks that need both high speed and fine torque control. One important thing to know about this motor is that it has permanent magnets. These magnets are dangerous in a number of ways. These magnets may also hurt sensitive things like credit cards and watches. To get rid of the rotor or secondary portion that has the magnets safely, it must be demagnetized. This is done by putting the part in an oven for at least 30 minutes at 300°C, which is the temperature at which the magnetic surface should attain. Before heating, the bandage or cover plate should be taken off the magnets to make sure they are properly demagnetized. After they cool down, users may safely pull the magnets away from the rotor or secondary portion without using any force. To avoid damage, the motor's electrical functioning must stay below certain limits.
The voltage rise time has to be more than 0.17 microseconds, and the crucial rate of increase of off-state voltage (du/dt) has to be below 8 kV/µs. There must be monitoring systems in place to make sure the motor doesn't go beyond its maximum speed or the continuous operation characteristic curve. For thermal protection, the temperature sensor must be properly integrated into the converter. To turn on the holding brake, which is an inductive load, there must be a protection circuit, either outside the converter or built into it.
Frequently Asked Questions about MS2N07-D0BNN-CMSG0-NNNNN-NN:
Q: Which series does the MS2N07-D0BNN-CMSG0-NNNNN-NN motor belong to?
A: This motor is part of the MS2N series from Bosch Rexroth Indramat.
Q: What is the frame size and motor length of this model?
A: The motor features a frame size of 07 and a motor length designated as "D.
Q: What is the winding code for this motor?
A: The winding code for this model is "0B," which identifies its specific electrical winding configuration.
Q: What type of encoder is integrated in the MS2N07-D0BNN-CMSG0-NNNNN-NN?
A: It includes a single-turn, absolute Hiperface encoder for precise position feedback.
Q: What is the encoder resolution of this motor?
A: The encoder has a resolution of 16 bits, ensuring accurate and reliable motion control.
