MS2N07-D0BNN-BSUL0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501245
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-D0BNN-BSUL0-NNNNN-NN synchronous servo motor offers a rated speed of 3000 rpm, a rated power of 750 W, a maximum torque of 6.7 Nm, and IP65 protection class. Designed as part of the MS2N Synchronous Servo Motors series by Bosch Rexroth Indramat, it is self-cooled and features an integrated Safe Motion encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N07-D0BNN-BSUL0-NNNNN-NN servo motor is a smart and advanced servo motor from Bosch Rexroth Indramat operating with permanent magnets to increase efficiency and remain cost-effective for industrial users. The mechanical build-up of this motor allows a speed up to 6000 revolutions per minute, and the electrical system also supports the speed up to this point for short periods. The peak speed for continuous operation without overheating is 2940 per minute. The speed, combined with the rated power of 5.2 kilowatts, firmly puts this motor to function as a rotary motor for movement precision and motion control. The motor is equipped with a Hiperface encoder to record and transmit this motion data.
The MS2N07-D0BNN-BSUL0-NNNNN-NN servo motor is designed to provide stability during operations. The low winding inductance of 10 microhenry helps to ensure proper torque response and fast current response. The winding resistance at cooler temperatures also contributes to the stability of the system. With 0.671 ohms as the motor designated winding resistance, it can offer higher efficiency, proper current response, and produce less heat. The heat is monitored by a PT1000 temperature sensor that is mounted to ensure the safety of the operation and users.
A self-cooling system that operates based on air convection is employed in this MS2N07-D0BNN-BSUL0-NNNNN-NN servo motor to keep the temperature within check. The cooling system requires that the motor design allow for a space of at least 80 millimeters for proper functioning. Harsh environmental conditions can lead to derating of the motor. This is prevented by regular cleaning of the motor surface. Operating the motor in less polluted environment also aid the cooling function. The motor uses a standard bearing for normal duties, and the rotating shaft is without a protective sealing ring.
Frequently Asked Questions about MS2N07-D0BNN-BSUL0-NNNNN-NN:
Q: How is the shaft in the MS2N07-D0BNN-BSUL0-NNNNN-NN designed?
A: The MS2N07-D0BNN-BSUL0-NNNNN-NN features a shaft equipped with keyway without a shaft sealing ring.
Q: Is there an air blower in this product?
A: No. The MS2N07-D0BNN-BSUL0-NNNNN-NN is a self cooled device. Heat is directly eliminated from its housing through natural convection and thermal radiation.
Q: How is the temperature inside this motor monitored?
A: There is a thermistor installed inside this product. The thermistor monitors the temperature in the motor winding, and sends a feedback to the converter.
Q: What type of encoder is used by this motor?
A: The MS2N07-D0BNN-BSUL0-NNNNN-NN features a standard single phase encoder with 128 signal periods.
Q: Can this motor withstand high relative humidity?
A: The maximum relative humidity standard for this product is about 95 percent water condensation around the unit should be avoided.
