MS2N07-D0BNL-CSVG0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501080
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-D0BNL-CSVG0-NNNNN-NN is a synchronous servo motor with a frame size of 07 and a voltage class of 400V. Manufactured by Bosch Rexroth Indramat under the MS2N Synchronous Servo Motors series, it features IP65 protection and natural surface cooling. It offers a maximum speed of up to 4500 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat is the top producer of industrial motors which mainly include MS2N07-D0BNL-CSVG0-NNNNN-NN. The variant is a part of IndraDyn S MS2N product series which facilitates system compatibility and project planning parameters for servo axes. Classified as synchronous servo motor, it is compatible with rotor field having an inverter frequency to enable accurate position control. The size of the module represents as “07” which standardizes flange dimensions and coupling selection for interchangeability.
Cooling the machine via natural surface relies on convection across the motor housing, removing the need for an integrated fan and lowering extra wiring demands. The feedback system applies single cable technology where a high-resolution encoder delivers both power and position data, simplifying layout and cutting down on connectors. Ingress protection of IP65 guarantees a sealed build against dust while also withstanding water jets, keeping inner elements safe in demanding environments. The 400V voltage class sets the standard three-phase input. A maximum speed for the model is 4500 RPM identifies the upper performance threshold, shaping decisions for gearbox alignment and dynamic system tuning.
Product code MS2N07-D0BNL-CSVG0-NNNNN-NN sets maximum torque up to 36 Nm for specifying short-term peak capability and sets coupling and shaft strength checks. Connection with single cable integrated power and feedback reduces installation complexity and supports longer hybrid cable runs. Its encoder resolution of 20-bit, singleturn with 4,096 revolutions, multiturn provides position granularity and absolute multiturn range for motion accuracy. Module’s low inertia informs acceleration response and drive tuning. Finally, its shaft diameter of 19 mm defines coupling bore and keying choices.
Frequently Asked Questions about MS2N07-D0BNL-CSVG0-NNNNN-NN:
Q: What feedback topology does MS2N07-D0BNL-CSVG0-NNNNN-NN use?
A: The feedback is based on single-cable technology with a high-resolution encoder which carries power and encoder signals in one hybrid cable.
Q: Which protection class applies to MS2N07-D0BNL-CSVG0-NNNNN-NN?
A: The ingress protection of IP65 prevents the motor’s internal elements to particulate ingress and defends against directed spray.
Q: What voltage class is listed for MS2N07-D0BNL-CSVG0-NNNNN-NN?
A: The voltage class is 400V which defines the nominal three phase supply requirement and further directs insulation selection and inverter configuration.
Q: What encoder resolution is specified for MS2N07-D0BNL-CSVG0-NNNNN-NN and why does it matter?
A: The encoder resolution for the module is 20 bit singleturn with 4,096 revolutions multiturn which determines position granularity and absolute range.
Q: What single-cable length is supported for MS2N07-D0BNL-CSVG0-NNNNN-NN and what benefit does it provide?
A: The single-cable maximum run is 75 m which permits longer hybrid cable runs between motor and drive. Further, it reduces the need for intermediate junctions and simplifies distributed layouts.
