MS2N07-D0BNL-CMVH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914500080
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-D0BNL-CMVH0-NNNNN-NN is a synchronous servo motor with a standard winding and natural convection cooling. Manufactured by Bosch Rexroth Indramat, it is part of the MS2N Synchronous Servo Motors series and offers an IP65 protection class. It supports maximum speeds of up to 6000 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Fall under the product range of MS2N Synchronous Servo Motors, the Indramat built MS2N07-D0BNL-CMVH0-NNNNN-NN display winding code “0B”. This defines the standard winding and sets baseline inductance and resistance for drive tuning. Natural convection mechanism indicates no built-in fan and therefore removes auxiliary fan power while requiring adequate clearance for heat dissipation. Featuring multiturn absolute encoder, Hiperface with SafeMotion certification supplies safety-capable feedback for functional safety systems.
The drive’s output connector positions at top and is rotatable in design, easing cable routing in confined assemblies. Degree of protection IP65 gives full protection and it not only simplifies system integration but also cuts down on maintenance needs. Permissible temperature 0°C to 40°C defines the standard operating envelope and sets derating rules for higher ambient conditions. Its max speed up to 6000 rpm identifies the transient rotational limit. Moreover, the rated voltage typically 400 V establishes the nominal three-phase supply. This MS2N07-D0BNL-CMVH0-NNNNN-NN model classified as synchronous servo motor and enables closed loop speed and position control. Size “07” defines the mechanical frame which determines flange and coupling compatibility.
Also, its length “D” shows the medium stack depth and can affect thermal mass and continuous torque capacity. Rotor inertia 3.7 kgcm² for comparable MS2N07 variants informs drive tuning and determines acceleration response in motion profiles. The addition of single-cable connection capability up to 75 m allows extended runs and also reduces wiring complexity in distributed layouts. Its maximum torque figures up to 92.5 Nm in certain MS2N07 variants establish short term peak capacity which guides shaft and coupling strength checks.
Frequently Asked Questions about MS2N07-D0BNL-CMVH0-NNNNN-NN:
Q: How does the cooling approach function on MS2N07-D0BNL-CMVH0-NNNNN-NN?
A: The cooling method is natural convection (no built-in fan). Natural convection removes auxiliary fan power and requires adequate clearance for convective airflow.
Q: What encoder option is fitted to MS2N07-D0BNL-CMVH0-NNNNN-NN variant?
A: The encoder used by the motor is a multiturn absolute encoder with Hiperface and SafeMotion certification. This encoder supplies absolute position on power up for immediate closed loop readiness.
Q: Where is the output connector located on MS2N07-D0BNL-CMVH0-NNNNN-NN?
A: The output connector is rotatable and position on the motor’s top and thus allows flexible cable exit directions during installation.
Q: What protection degree applies to MS2N07-D0BNL-CMVH0-NNNNN-NN?
A: The module is certified by the protection class of IP65 which denotes dust tight enclosure and resistance to low pressure water jets.
Q: What ambient temperature range is permitted for MS2N07-D0BNL-CMVH0-NNNNN-NN servo drive?
A: The permissible ambient temperature is 0°C to 40°C which defines the standard operating window and also establishes derating procedures for higher ambient conditions.
