MS2N07-D0BNL-CMVG2-NNNNV-GA
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911395545
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-D0BNL-CMVG2-NNNNV-GA servo motor features a medium D-length design, natural convection cooling, and IP65 protection. Part of the MS2N Synchronous Servo Motors range by Bosch Rexroth Indramat, it boasts a rated speed of up to 4500 rpm and utilizes a CMV absolute multiturn encoder for precise operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N07-D0BNL-CMVG2-NNNNV-GA by Bosch Rexroth company belongs to the MS2N servo motors family. The synchronous motor’s dimension fixes the stator profile and connection geometry, ensuring it matches seamlessly with “07” size flanges and couplings. Rated at IP65, the enclosure is resistant to dirt and sprayed water, keeping industrial operation reliable. A holding torque of 13.6 Nm offers solid axis retention during standstill or when lightly loaded.
The rotor’s inertia value identifies as low inertia, suited for fast acceleration and responsive control adjustments. A peak torque capacity of 79.7 Nm on comparable versions provides short-term output, protecting shaft and coupling durability. The single-cable feature extends up to 75 m to support longer runs and straightforward setup in distributed drive layouts. The integrated CMV absolute, multiturn encoder enables direct position feedback at start-up with a one-cable solution, reducing wiring complexity. The “D” shows length with a medium body stack to raise thermal storage and allows the device to run more before reaching temperature thresholds.
The MS2N07-D0BNL-CMVG2-NNNNV-GA delivers a rated speed of 4500 rpm which sets its working performance range and informs gearbox alignment. It can also climb to 6000 rpm at maximum, giving extra allowance for speed peaks and bearing checks. Weighing 4.9 kg, typical of the MS2N07 category, the unit remains easy to handle and does not overload mounting frames. The heat is released by natural convection process, relying on open airflow instead of forced cooling. The device’s connector is mounted on “top” in a rotating design; thus, it becomes easier to route in crowded panels while lowering bending stress on cables.
Frequently Asked Questions about MS2N07-D0BNL-CMVG2-NNNNV-GA:
Q: What is the peak torque capacity of the MS2N07-D0BNL-CMVG2-NNNNV-GA?
A: The module can simply support a peak torque of 79.7 Nm, which provides strong short bursts of power during demanding acceleration phases.
Q: How heavy is the MS2N07-D0BNL-CMVG2-NNNNV-GA unit?
A: This Bosch Rexroth ‘s MS2N07-D0BNL-CMVG2-NNNNV-GA weighs 4.9 kg and makes it easier to handle during installation and reduces strain on base mounting structures.
Q: What type of encoder does the MS2N07-D0BNL-CMVG2-NNNNV-GA employ?
A: The servo motor comes with a CMV absolute multiturn encoder that provides position feedback at power-up and simplifies wiring with a single-cable solution.
Q: What is the rotor inertia of the industrial MS2N07-D0BNL-CMVG2-NNNNV-GA motor?
A: It has a rotor inertia of 0.0021 kg·m², classifying it as a low-inertia motor suited for rapid acceleration and precise control.
Q: What is the holding torque of the MS2N07-D0BNL-CMVG2-NNNNV-GA?
A: The MS2N07-D0BNL-CMVG2-NNNNV-GA variant delivers a holding torque of 13.6 Nm, providing secure axis stability during pauses and light load conditions.
