MS2N07-D0BHN-CMSK2-NNANN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911381656
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N07-D0BHN-CMSK2-NNANN-NN motor is part of the MS2N Synchronous Servo Motors series and features a 100 mm flange size. It delivers a rated power of 2.3 kW and maximum torque of 26.5 Nm. With natural convection cooling, the motor has a rated speed of 3000 rpm and utilizes a single-cable Hiperface DSL encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This MS2N07-D0BHN-CMSK2-NNANN-NN synchronous servomotor supplied by Bosch Rexroth Indramat is prone to damage because of humidity and moisture. The motor’s bearings and encoder have to be replaced after more than five years of storage. This product supports the conduction of a defined over-pressure into it by using an air-pressure connector kit. The device-related pressure air must be dry and free of oil according to DIN ISO 8573-1 specifications. This unit is delivered with the compressed air gland in the open state. Its typical sound pressure level has been specified for a speed range of 0 rpm to the rated speed. The motor depends on an advanced encoder with an ACUROlink interface for feedback.
This product’s safety notes and connectors must be covered before coating the housing with an additional layer of varnish. The device’s machine elements must be secured in the axial position through the DS M10 centering hole. This unit may get damaged because of liquid penetration. Its load limits should never be exceeded. The motor’s holding brake is directly connected to the drive controller. This product uses 30 M10 mounting screws with a tightening torque of 48 Nm. This device has high energy efficiency. The unit features reduced long-term operating costs. Its drive controller is capable of extending the usable torque range.
The synchronous servomotor’s NDE bearing might get damaged when the maximum permissible axial force is exceeded. This product’s centering collar has a size of 130 mm. The device must have at least 100 mm of free space from adjacent components. This unit’s encoder implements digital data transmission. It is designed with a short coil head.
Frequently Asked Questions about MS2N07-D0BHN-CMSK2-NNANN-NN:
Q: What is the operating pressure supported by the MS2N07-D0BHN-CMSK2-NNANN-NN motor?
A: The operating pressure supported by the MS2N07-D0BHN-CMSK2-NNANN-NN motor is 0.1 +/-0.05 bar.
Q: What causes thermal exertion of the holding brake of the MS2N07-D0BHN-CMSK2-NNANN-NN motor?
A: Multiple regenerative brake applications cause thermal exertion of the holding brake of the MS2N07-D0BHN-CMSK2-NNANN-NN motor.
Q: What foreign converters does the MS2N07-D0BHN-CMSK2-NNANN-NN motor support?
A: The MS2N07-D0BHN-CMSK2-NNANN-NN motor supports foreign converters with pulse width modulation at the power output stage.
Q: What is the maximum installation altitude of the MS2N07-D0BHN-CMSK2-NNANN-NN motor?
A: The maximum installation altitude of the MS2N07-D0BHN-CMSK2-NNANN-NN motor is 3000 m above sea level.
Q: What kind of vibrations does the MS2N07-D0BHN-CMSK2-NNANN-NN motor encounter in stationary use?
A: The MS2N07-D0BHN-CMSK2-NNANN-NN motor encounter vibrations in the form of sine-wave oscillations in stationary use.
