MS2N07-D0BHN-CMSG2-NNNNV-GA

Product Description:

The MS2N07-D0BHN-CMSG2-NNNNV-GA lands in the MS2N Synchronous Servo Motors series, put together by Bosch Rexroth Indramat and meant for spots that call for absolute accuracy and steadiness. A full run at 2500 rpm and steady rated torque of 9.2 Nm mark this model, partnered up with a rated power output of 2.37 kW to drive automation processes or precision applications without tripping up under load. With a frame size listed as 070 and motor length D, fitting isn’t tricky in crowded panels or equipment.

Tough wiring problems don’t really come up with this motor, thanks to the straight setup and organized cable joints. The design folds in an Enhanced Hiperface, Single-turn encoder, also keeping a CMSG2 feedback system built in, so every signal stays sharp when tracking position. No method for a brake is bolted on with this type, so installations that need fail-safe holding will look further, but many continuous-motion jobs skip that anyways. The whole setup gets power at 400 V and uses 5.01 A for its main current, showing up reliable whether teamed with robotics or heavy conveyor systems.

Protection and smooth handling come through a housing that covers things from dust and light splashes—no spot for water or odd bits to get in easily—which helps cut down maintenance calls. High-precision automation gets a real bump in performance because the maximum torque reaches 37 Nm, and a true stall torque lands at 9.2 Nm too, letting the unit hang in there if work slows or jams up. Dimensioning sticks to industrial standards, while details like the lack of brakes, bright feedback for controls, and straightforward wiring placement make jobs faster to finish. For plants running lots of shifts, this servo stands in strong and keeps parts and panels moving clean and accurate shift after shift.