MS2N07-D0BHN-BSUG2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501247
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor is a synchronous motor with a size 07 frame, a rated torque of 3.7 Nm, a maximum torque of 11.1 Nm, and operates at a rated speed of 3000 rpm. Manufactured by Bosch Rexroth Indramat as part of the MS2N Synchronous Servo Motors series, it features IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N07-D0BHN-BSUG2-NNNNN-NN is a servo motor that delivers consistent performance in sustained duty cycles for various industrial automation tasks. This MS2N motor by Bosch Indramat provides a rated torque of 22.0 Nm. The servo motor maintains a steady operating speed of 2000 revolutions per minute.
The MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor features a continuous power output of 4.6 kilowatts. It requires a rated current of 8.85 A. It offers 22.0 Nm of holding torque with a current draw of 8.55 A at a winding temperature of 60K. The standstill torque rises to 28.2 Nm when the winding temperature increases to 100K. The current required reaches 11.1 A under the same conditions. This thermal response supports dependable torque output across changing temperature conditions. The MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor allows for a mechanical speed ceiling of 6000 rpm. It has an electrical speed limit of 4000 rpm. The internal layout includes 5 pole pairs. This contributes to accurate rotational control and smooth motion profiling. The rotor has an angular mass of 0.0021 kg·m². This allows quick transitions in start-stop operations and dynamic movement tasks. The motor reaches a peak torque of 79.7 Nm at a cold start temperature of 20°C. The maximum torque capacity is slightly reduced to 73.2 Nm under 100K conditions. The motor requires a current supply of 36.4 amperes during peak output.
The torque constant of the MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor is 2.76 Nm/A. The back EMF constant is 167.5 V per 1000 rpm. The motor has a winding resistance of 1.30 ohms. The inductance is measured at 20.2 mH. A leakage capacitance of 4.1 nanofarads helps suppress electrical noise during motor operation. The winding reaches thermal equilibrium in 54.0 seconds. However, the motor housing stabilizes in approximately 18.7 minutes.
Frequently Asked Questions about MS2N07-D0BHN-BSUG2-NNNNN-NN:
Q: How does MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor handle thermal variation?
A: The MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor adjusts torque output with winding temperature for consistent performance. This helps ensure reliability during prolonged industrial operation.
Q: What integration benefits do 5 pole pairs offer the MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor?
A: The MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor uses 5 pole pairs to enable precise control of angular position. This enhances smooth profiling in complex automation sequences.
Q: What contributes to MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor’s peak torque performance?
A: The MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor achieves peak torque through optimized cold-start current delivery. Bosch Indramat ensures mechanical endurance under maximum demand.
Q: Why is the torque constant important in MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor?
A: The MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor's torque constant enables efficient current-to-torque conversion. This ensures predictable dynamic behavior in motion control environments.
Q: How does MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor perform in dynamic tasks?
A: The MS2N07-D0BHN-BSUG2-NNNNN-NN servo motor’s low rotor inertia supports fast acceleration. It suits pick-and-place systems or high-speed tool adjustments with minimal lag.
