MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911387779
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN servo motor is part of the MS2N Synchronous Servo Motors series and features natural convection cooling. It delivers a continuous standstill torque of 11.4 Nm and operates at a rated speed of 4200 RPM. The motor is IP65 rated and includes a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN servo motor has its rotor’s permanent magnet rotating at the same speed as the stator’s rotating magnetic field. This feature makes this excellent servo motor by Bosch Rexroth Indramat suitable for meet the demands of high-precision industrial environments. The environmental conditions should be kept at optimal value to ensure peak performance of the motor. The MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN servo motor features a smooth shaft key and is manufactured without a holding brake, making it simpler and suitable for applications where continuous rotation and precise control are required. The optical absolute value encoder with 128 signal periods ensures accurate position feedback and dependable communication with control systems.
The MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN servo motor is classified under insulation class F, allowing it to operate reliably at winding temperatures up to 155 degrees Celsius. This temperature is a large gap from the acceptable ambient temperature of 40 degrees Celsius, and this gap makes room for higher tolerance. The motor can continuously run at a speed of 2000 revolutions per minute. The low-inertia model of this motor offers a robust balance between speed and responsiveness.
The operating mode of the MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN servo motor allows for torque performance and optimization across temperature ranges. At zero shaft rotation, the motor delivers 22.0 newton meters under cold conditions and 28.2 newton meters when warm. Its low moment of inertia, measured at 0.0021 kilogram meters squared, enables rapid acceleration and deceleration, which is essential for motion control tasks. These values are attainable when the motor is installed within a range of 1000 meters above sea level. The maximum electrical speed is 4000 revolutions per minute. The thermal time constant of this motor is 18.7 minutes, and the motor weighs 17.5 kilograms.
Frequently Asked Questions about MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN:
Q: How does this motor handle excess heat?
A: The heat produced inside the motor is conducted from the winding to its housing where it is dissipated by natural convection, and radiation.
Q: Can the MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN be directly connected to a three-phase network?
A: The direct connection of this product to a three phase network is forbidden. The unit must first be connected to a controller.
Q: What is the level of inertial produced by this product?
A: The MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN is a low inertial device.
Q: What type of encoder is in this product?
A: The MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN features a standard multiturn encoder with 128 signal periods. The encoder operates with the hiperface interface.
Q: Is the MS2N07-D0BHN-BMUH0-NNNNN-GE160N2040AN-NN equipped with a ball bearings?
A: There are standard ball bearings attached to this product. The bearings have a long service life of about 30,000 hours.
