MS2N07-D0BHN-ASUK0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911385493
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-D0BHN-ASUK0-NNNNN-NN, a synchronous servo motor from Bosch Rexroth Indramat's MS2N Synchronous Servo Motors series, operates with natural convection cooling. It delivers a nominal torque of 4.0 Nm and a maximum torque of 12.0 Nm. The motor has an IP65 protection class and utilizes a Y (Wye) stator connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N07-D0BHN-ASUK0-NNNNN-NN is a Servo motor that comes in frame size 07 with length type D. The unit is designed by Bosch Rexroth and belongs to the MS2N family. The motor is built with a low-inertia rotor and uses BH-class windings. This winding configuration supports a nominal operating speed of 2000 rev/min.
The MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor features natural convection cooling that meets the IC410 thermal standard. The motor integrates a level B encoder with 128 signal cycles. It utilizes HIPERFACE® interface technology. The power is supplied through an M23 connector, and encoder signals are routed via an M17 connector. The MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor uses shaft type K, which includes a keyway and half-key. The shaft is balanced and protected with a sealing ring to prevent contamination. The MS2N07 servo motor is provided without an integrated locking brake. The flange diameter is 140 mm, while the shaft measures 32 mm in diameter and 58 mm in length. These proportions allow stable coupling in compact installations. In static operation, the motor delivers a standstill torque of 22.0 Nm at 60K by drawing the current of 8.55 A. The torque rises to 28.2 Nm with a current requirement of 11.1 A at 100K conditions.
The MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor has the rated torque of 22.0 Nm. This is supported by a continuous current of 8.85 A. The motor provides a continuous output power of 4.6 kW at a constant rated speed of 2000 rpm. The maximum torque output of the motor is 79.7 Nm at 20°C. It requires a peak current draw of 36.4 amperes. The peak torque produced is 73.2 Nm at 100K thermal conditions. This servo motor is suited for industrial automation systems requiring compact build and advanced safety compliance.
Frequently Asked Questions about MS2N07-D0BHN-ASUK0-NNNNN-NN:
Q: How does MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor manage encoder feedback?
A: The MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor uses a level B encoder with 128 cycles and HIPERFACE®. This supports high-resolution signal accuracy for real-time motion feedback.
Q: What shaft configuration does the MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor use?
A: The MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor uses a keyway shaft with a half-key and a sealing ring. This minimizes contamination and provides stable keyed coupling.
Q: How is thermal management handled in MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor?
A: The MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor applies IC410 natural convection cooling. It ensures passive heat dissipation for low-noise, maintenance-free operation.
Q: Why does MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor use BH-class windings?
A: BH-class windings in the MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor support efficient magnetic performance. They enable steady torque output under thermal stress and low-inertia dynamics.
Q: What torque levels define MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor operation?
A: The MS2N07-D0BHN-ASUK0-NNNNN-NN servo motor outputs 22.0 Nm at 60K and up to 28.2 Nm at 100K. These torque values support varying thermal envelopes in automation.
