MS2N07-D0BFN-BMUH2-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914500098
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-D0BFN-BMUH2-NNNNN-NN is a synchronous servo motor with natural cooling and a standard mounting flange. Manufactured by Bosch Rexroth Indramat as part of the MS2N Synchronous Servo Motors series, it has a frame size of 07 and a single-turn Hiperface feedback system. It delivers 6.8 Nm of torque and IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N07-D0BFN-BMUH2-NNNNN-NN is a 3-phase synchronous AC motor. It is designed by Bosch Rexroth for applications with closed-loop control. The motor can by identified by the information listed on the attached type plate. To decipher the product type code, operators need to refer to the specific product manual. For this reason, and to aid identification, important technical specifications and other product related information, such as serial numbers, are printed on the type plate. MS2N motors work in combination with a Bosch Rexroth servo drive. These are 3-phase AC motors with permanent magnets for reliable operation. The input voltage can be 400 Volts AC (uncontrolled) or 400 to 480 Volts AC (controlled). Operators can refer to the MS2N product planning manual to view the detailed torque-speed graphs for their specific motor. MS2N07-D0BFN-BMUH2-NNNNN-NN is motor with frame length code D and winding code BF.
Its windings are designed for 1500 RPM nominal speed. The specified motor nominal speed is 1340 RPM. At standstill, the motor delivers 28.3 Nm torque and 7.55 Nm current. Its rated torque and current are 24.9 Nm and 6.75 Amps. Four types of motor encoders in singleturn and multiturn variants are available for this motor product line. MS2N07-D0BFN-BMUH2-NNNNN-NN is equipped with a standard-performance multiturn encoder. The size 2 electrically-released holding brake installed on the motor provides 36 Nm holding torque. With self-cooling, the motor operates without requiring an external fan or its associated additional power. Two rotatable connections are available for feedback and power cables. As there is no seal on the shaft, the motor is IP64 rated. Personnel working on the motor must follow recommended safety precautions.
Frequently Asked Questions about MS2N07-D0BFN-BMUH2-NNNNN-NN:
Q: Is a holding brake installed on the motor?
A: A holding brake is installed on the motor.
Q: What is the motor weight?
A: The motor weight is 20 kilograms.
Q: What is the operating temperature?
A: The operating temperature range is 0 to 40 ⁰C.
Q: What is the input voltage range?
A: The input voltage range is 400 to 480 Volts AC.
Q: Which bearings are used on the motor?
A: Standard bearings are used on the motor.
