MS2N07-C1BRN-AMUL0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914501715
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C1BRN-AMUL0-NNNNN-NN motor from Bosch Rexroth Indramat's MS2N Synchronous Servo Motors Series features a multiturn absolute encoder (AMU) using Hiperface technology. It offers natural convection cooling and a rated speed of up to 3000 rpm. The motor boasts a protection rating of IP65 and a typical rated torque of 7 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N07-C1BRN-AMUL0-NNNNN-NN is a part of Indramat’s MS2N Synchronous Servo Motor series which places the module inside the MS2N family for matched system integration. IP rating IP65 provides protection of internal components from dust particles and repel water streams in different environmental settings. The module uses rotatable connectors which allow plug orientation to match cabinet or frame clearances and reduces cable bending stress during installation. Paint or coating is standard paint that provides baseline corrosion resistance and supports consistent surface finishing across machine frames.
Motor size MS2N07 shows the physical frame which standardizes flange and shaft dimensions for direct mechanical interchange with common couplings. Motor length “C1” appears in mechanical codes to fix stack length and supports predictable mounting depth and enclosure planning. The multiturn absolute encoder AMU with Hiperface appears in the ordering code also delivers absolute position across revolutions and enables quick position recovery after power interruptions. Cooling method for this drive uses natural convection with the standard housing. This mechanism transfers heat through the motor surface into ambient air and eliminates the need for internal fans at rated duty. Rated power varies by configuration typically 1.6 to 3.7 kW, thus defines continuous mechanical output ranges.
Featuring a maximum speed up to 6000 RPM by MS2N07-C1BRN-AMUL0-NNNNN-NNmodel sets the absolute mechanical ceiling and defines controller overspeed protection limits to avoid bearing or coupling damage. Further, its flange size 140 mm appears on product drawings that matches common bolt-circle patterns and allows direct use of off-the-shelf mounting plates for precise alignment. Also, rated torque typically 7 Nm appears in the manual, setting the continuous torque baseline. The drive’s rated speed up to 3000 rpm further establishes the nominal rotational reference used for power and gearbox calculations.
Frequently Asked Questions about MS2N07-C1BRN-AMUL0-NNNNN-NN:
Q: What is the relevance of part number MS2N07-C1BRN-AMUL0-NNNNN-NN in identifying protection rating?
A: Part number MS2N07-C1BRN-AMUL0-NNNNN-NN maps to a motor with protection rating of IP65. This prevents dirt and resists low-pressure water jets which allows mounting in dusty or occasionally washed production zones without extra enclosure work.
Q: What does the model number MS2N07-C1BRN-AMUL0-NNNNN-NN indicate about connector design and how does that affect installation?
A: It includes rotatable connectors which permit orienting the plug for optimal cable routing. This feature simplifies assembly and access in cramped machine layouts while maintaining secure electrical connections.
Q: How does MS2N07-C1BRN-AMUL0-NNNNN-NN specify surface treatment and what practical outcome follows?
A: The MS2N07-C1BRN-AMUL0-NNNNN-NN lists standard paint which provides baseline corrosion protection and uniform surface finish.
Q: What does MS2N07-C1BRN-AMUL0-NNNNN-NN reveal about motor frame classification and why does that matter mechanically?
A: Th synchronous motor uses size of MS2N07 which standardizes flange diameter and shaft interfaces to enable direct coupling to common gearboxes and simplifies mechanical integration using existing mounting hardware.
Q: How does the MS2N07-C1BRN-AMUL0-NNNNN-NN motor length code affect machine layout and what design action follows?
A: Motor length C1 appears in this part code which fixes axial stack length and mounting depth, and engineering must use that length to calculate enclosure depth and adapter plate dimensions to ensure fit in the machine frame correctly.
