MS2N07-C1BRN-AMUH0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911389300
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C1BRN-AMUH0-NNNNN-NN is a servo motor manufactured by Bosch Rexroth Indramat. As part of the MS2N Synchronous Servo Motors series, it operates at a rated speed of 3000 rpm with a rated torque of 7.2 Nm. This motor features a C1 absolute multi-turn encoder for feedback and has IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N07-C1BRN-AMUH0-NNNNN-NN is identified by Bosch Rexroth as a synchronous servo motor from the famous MS2N series. The motor series shows uniform design standards with a current rating of 4.3 A, indicating the steady electrical demand. This simply helps you determine proper cable size and protection devices for reliable continuous operation. The rated torque of 7.2 Nm defines the motor’s constant load capacity, guiding gearbox selection and bearing support for long term motion tasks. Speed for this unit is rated up to 3000 rpm, serving as the nominal rotation level and shaping the power-to-torque balance in controllers.
A peak torque of 17.9 Nm provides temporary acceleration capacity to avoid stalling under sudden load changes. The connector type is rotatable, allowing users to position it for optimal cable routing and less stress in tight spaces. Natural convection cooling allows passive heat control without extra blower components for a cleaner setup. The IP65 ingress protection guarantees the motor is dust-tight and water-resistant, making it suitable for various industrial settings. A rated power of 1.7 kW specifies the constant mechanical output at nominal speed and hence guiding the choice of equipment for steady workloads.
The part number MS2N07-C1BRN-AMUH0-NNNNN-NN is repeated for easy identification along with its mechanical features. “07” motor size validates flange and shaft compatibility with standard couplings and adapters. The C1 feedback system uses an absolute multi-turn encoder to retain position data across revolutions, enabling proper recovery after power interruptions. Operating at 400 V, the drive matches inverters designed for this voltage and meets electrical insulation needs. The flange-mounted design standardizes installation and makes integration into machine frames straightforward.
Frequently Asked Questions about MS2N07-C1BRN-AMUH0-NNNNN-NN:
Q: What is the rated current specification for MS2N07-C1BRN-AMUH0-NNNNN-NN and how should it be applied?
A: The rated current for MS2N07-C1BRN-AMUH0-NNNNN-NN is 4.3 A which defines steady electrical draw at nominal operation.
Q: What role does the rated speed play in control design for MS2N07-C1BRN-AMUH0-NNNNN-NN?
A: Its 3000 rpm speed maintains the nominal shaft velocity used for power and torque calculations to assist in defining velocity dependent control parameters and establishing expected cycle times for the application.
Q: How should maximum torque be considered when analyzing MS2N07-C1BRN-AMUH0-NNNNN-NN for transient loads?
A: The device's maximum torque of 17.9 Nm indicates short-term peak capacity which enables rapid accelerations and handles transient load spikes while preserving thermal headroom.
Q: What installation benefit follows from the connector type specified for MS2N07-C1BRN-AMUH0-NNNNN-NN?
A: The connector is rotatable which permits orienting the plug to suit cabinet or frame clearances and reduces cable bending stress.
Q: How does natural convection cooling influence mounting and enclosure choices for MS2N07-C1BRN-AMUH0-NNNNN-NN?
A: The natural convection enables passive heat transfer through ambient air and conduction to the mounting structure which removes the need for integrated fans at rated duty.
