MS2N07-C1BRN-AMUG0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911389901
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N07-C1BRN-AMUG0-NNNNN-NN is part of the MS2N Synchronous Servo Motors series and features a size 07 frame with natural convection cooling. It delivers a rated power of 1.7 kW and rated speed of 3000 rpm. The motor includes IP65 protection and utilizes a Singleturn EnDat encoder for feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N07-C1BRN-AMUG0-NNNNN-NN belongs to the Bosch Rexroth Indramat top-reviewed MS2N synchronous motor series. Its voltage supply 400 V appears on electrical data which defines the supply level required for compatible drives. The machine uses a cooling type as natural convection which allows passive heat removal and reduces need for extra fan hardware. IP rating of IP65 is present to prevent dust ingress and resists low pressure water jets for harsh factory zones.
The 3000 rpm rated speed establishes the nominal rotational reference for torque and power calculations. Moreover, the rated current 3.7A is stated that sets the steady electrical load for drive and cable sizing. The module with rated power 1.7 kW determines continuous mechanical output at nominal speed for sustained tasks. Feedback choice of singleturn EnDat encoder is specified for absolute positional feedback within one revolution, ensuring precise closed loop control. The maximum torque of 16 Nm is specified, providing extra acceleration capacity to handle temporary load demands. The motor’s size of frame 07 standardizes flange and shaft geometry for mechanical integration.
With no holding brake, it reduces rotor mass where an external lock is preferred. As a synchronous servo design, it defines electromagnetic layout to ensure constant field operation with precise control response. A rated torque of 5.1 Nm sets the continuous load level for stable running conditions. The MS2N specification also includes a top speed of 6000 min⁻¹ which identifies the safe upper mechanical limit of the drive. A flange size of 140 mm ensures compatibility with common mounting patterns on machine frames. Power connector options appear for size MS2N07 which allow either M23 or M40 plugs and enable flexible cable routing during installation.
Frequently Asked Questions about MS2N07-C1BRN-AMUG0-NNNNN-NN:
Q: What is the rated voltage for MS2N07-C1BRN-AMUG0-NNNNN-NN and how does this affect electrical planning?
A: It lists a rated voltage of 400 V which sets the nominal supply requirement for the motor and drive pairing.
Q: How does the cooling type specification influence installation of MS2N07-C1BRN-AMUG0-NNNNN-NN?
A: The motor uses natural convection cooling which dissipates heat through ambient air movement and conduction to the mounting structure.
Q: What does the protection class indicate for MS2N07-C1BRN-AMUG0-NNNNN-NN and where is it applicable?
A: The module carries an IP65 protection class which blocks dust ingress and withstands low pressure water jets. This rating permits direct mounting in dusty manufacturing cells and areas subject to periodic washdown procedures.
Q: How does the rated speed specification influence motion profiles for MS2N07-C1BRN-AMUG0-NNNNN-NN?
A: The device’s rated speed of 3000 rpm sets the nominal shaft velocity used for torque and power calculations. This parameter determines gearbox ratios, expected cycle times, and the design of velocity-dependent control loops.
Q: What role does the rated current play in electrical design for MS2N07-C1BRN-AMUG0-NNNNN-NN?
A: A rated current of 3.7 A defines the steady electrical draw at rated operation which informs conductor sizing, breaker selection, and thermal limits.
