MS2N07-C1BRL-CMVG1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911392428
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C1BRL-CMVG1-NNNNN-NN is a servo motor produced by Bosch Rexroth Indramat. Part of the MS2N Synchronous Servo Motors series, it features a natural convection cooling method and a multiturn absolute encoder. The motor has a rated power of 2.37 kW and a rated speed of 4000 rpm. It offers a degree of protection rated at IP65.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N07-C1BRL-CMVG1-NNNNN-NN is listed as MS2N Servo Motor and is produced by Bosch Rexroth. This locates the industrial unit inside the MS2N series for consistent part-family engineering. Motor size 07 appears on the product code and matches common flange and shaft dimensions for standard mounting. Natural convection is specified for cooling which dissipates heat passively and removes the need for auxiliary blowers under rated operation.
The device’s encoder type CMVG1 is specified as a multiturn absolute encoder, providing persistent, absolute positional information after power loss for reliable indexing. Its connection type is listed as connector, rotatable which allows flexible cable routing and simpler installation in confined assemblies. Braking option shows no holding brake which reduces rotating mass when no mechanical hold is required. Level of protection include IP65 certification and that protects the internal components from dust ingress and low-pressure water sprays for harsher environments. Rated power of 2.37 kW is stated just to define the continuous mechanical output available at nominal conditions for drive and load matching. 4000 RPM rated speed is given which sets the nominal rotational reference for torque and power calculations in system design.
Further, the module produces a rated torque 5.7 Nm that determines continuous torque capability for sustained application loads. With its maximum torque 15 Nm, it allows handling of short acceleration bursts and transient loads without immediate thermal overload. Moment of inertia 1.15 kg·cm² is specified which affects dynamic response and tuning for motion control algorithms. The motor’s mass of approx. 5.3 kg is recorded which informs handling, mounting and inertia matching for the driven system. Offering a maximum speed nMax of 6000 min⁻¹, the unit appears in official product tables which sets the absolute mechanical speed limit for safe operation.
Frequently Asked Questions about MS2N07-C1BRL-CMVG1-NNNNN-NN:
Q: What cooling method is specified for MS2N07-C1BRL-CMVG1-NNNNN-NN and what operational benefit results?
A: The process of natural convection cooling serves as the thermal management mode which removes the need for auxiliary fans during rated operation.
Q: What encoder type is listed for MS2N07-C1BRL-CMVG1-NNNNN-NN and what control advantage does it provide?
A: The encoder CMVG1 is an absolute multiturn device which preserves absolute shaft position across power cycles.
Q: How does the connection type affect installation of MS2N07-C1BRL-CMVG1-NNNNN-NN and what practical benefit follows?
A: A rotatable connector interface appears in the type code which enables orientation of the plug to match cable routing. This flexibility reduces strain on cables and simplifies routing in compact enclosures.
Q: Why is the absence of a holding brake noted for MS2N07-C1BRL-CMVG1-NNNNN-NN and what system result follows?
A: The specification lists no holding brake which keeps rotor mass lower and eliminates brake control circuitry. This design suits applications where mechanical locks or external brakes handle stationary safety requirements.
Q: How does the degree of protection impact deployment of MS2N07-C1BRL-CMVG1-NNNNN-NN and what environments are supported?
A: This MS2N motor carries IP65 protection which blocks dust ingress and resists low pressure water jets, and it allows mounting in dusty production zones.
