MS2N07-C1BNN-CMUG1-NNANN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911376497
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MS2N07-C1BNN-CMUG1-NNANN-NN is part of the MS2N Synchronous Servo Motors series and is designed with a frame size of C1. It features a multi-turn absolute encoder with Hiperface DSL interface, natural convection cooling, and a peak torque of 22 Nm. The motor offers IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Offered by Bosch Rexroth Indramat, this MS2N07-C1BNN-CMUG1-NNANN-NN synchronous servomotor encompasses a holding brake. The motor is protected against thermal overload by a temperature sensor and a temperature model. This product portrays a standard flange exactness. The device is considered to be put to inappropriate use when used outside the specified ambient conditions. This unit supports operation on foreign converters. Its temperature sensor is located in its windings. The motor features a high-voltage load during converter operation.
This product’s hoisting gear must withstand the motor weight. The device’s eye bolts have to be checked for firm seating before use. This unit’s insulation resistance must be measured after more than 12 months of storage. It should be stored only in rainproof and dry rooms. The motor’s permanent magnets are incorporated in its rotor. This product’s temperature signals are transmitted through the encoder’s interface by cyclic communication. The device housing can be coated with another layer of paint of not more than 40 µm thick. This unit’s holding brake cannot decelerate the speed of the motor. Its radial force may cause an unacceptably high load on the bearings and shaft if an overdetermined bearing is used.
The motor’s shaft ensures a smooth running action without play and backlash. This product’s holding brake has a voltage rating of 24 VDC. The device’s connectors must not be turned using tools like pliers. This unit’s mounting flange is sized at 140 mm. It can be installed in the upright position with the shaft upward or downward. The synchronous servomotor’s type plates, safety notes, and open connectors must be covered before it is painted.
Frequently Asked Questions about MS2N07-C1BNN-CMUG1-NNANN-NN:
Q: What kind of foreign converters can the MS2N07-C1BNN-CMUG1-NNANN-NN motor be operated on?
A: The MS2N07-C1BNN-CMUG1-NNANN-NN motor can be operated on a foreign converter with pulse width modulation and a pulse frequency of 4 kHz to 16 kHz.
Q: What kind of coil head does the MS2N07-C1BNN-CMUG1-NNANN-NN motor have?
A: The MS2N07-C1BNN-CMUG1-NNANN-NN motor has a short coil head.
Q: What is the working principle of the holding brake of the MS2N07-C1BNN-CMUG1-NNANN-NN motor?
A: The holding brake of the MS2N07-C1BNN-CMUG1-NNANN-NN motor works on the electrically releasing principle.
Q: What kind of coating does the MS2N07-C1BNN-CMUG1-NNANN-NN motor housing have?
A: The MS2N07-C1BNN-CMUG1-NNANN-NN motor housing has a water-based coating.
Q: What is the shaft length of the MS2N07-C1BNN-CMUG1-NNANN-NN motor?
A: The shaft length of the MS2N07-C1BNN-CMUG1-NNANN-NN motor is 58 mm.
