MS2N07-C1BNN-CMUG0-RNNNN-NN

Product Description:

Delivered by Bosch Rexroth Indramat, this MS2N07-C1BNN-CMUG0-RNNNN-NN synchronous servomotor comes with an additional rating plate and protective covers for the shaft and connectors. The motor’s lifting equipment must be capable of withstanding its weight. This product comes without any holding brake. The device has an IP 65 degree of protection. This unit cannot be used for non-commercial or non-industrial applications. It provides no support for a terminal box connection. The motor’s construction depicts the use of standard bearings.

This product’s transport, storage, assembly, connection, and maintenance must be done properly and carefully for safe and appropriate use. The device features susceptibility to damage when its safety instructions are not followed. This unit’s magnets are to be demagnetized using a thermal treatment before their disposal. Its encoder outputs parameters and processes data digitally through the ACUROlink protocol. The motor’s drive controller monitors the functionality of its temperature sensor. This product is automatically disconnected from the power supply when its surface temperature reaches 150 °C. The device needs regular checks and cleaning to increase its availability. This unit’s hot surface must be worked on only after wearing protective gloves to avoid the possibility of burns. It has bearings on the drive and non-drive ends.

The motor encounters radial as well as axial forces in the operation phase. This product’s bearings feature a life of 30,000 operating hours with 60K operating data and a load factor of 95% during the runtime. The device’s oscillating behavior corresponds to the oscillating quantity level A as per DIN EN 60034-14 specifications. The unit’s deep-groove ball bearing is prelubricated with grease. It has concentricity and alignment tolerance of 0.1 mm.