MS2N07-C1BNN-CMSH1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911398625
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C1BNN-CMSH1-NNNNN-NN servo motor is manufactured by Bosch Rexroth Indramat. As part of the MS2N Synchronous Servo Motors series, it features a rotary multi-turn encoder and a rated power of 4.5 kW. The motor's rated torque is 14.3 Nm with a maximum torque of 44 Nm. It employs natural convection cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MS2N07-C1BNN-CMSH1-NNNNN-NN is a motor that is highly optimized for industrial use. Its manufacturer is Bosch Rexroth, a global leader in industrial control solutions. The motor belongs to the average inertia class and its rotor inertia is 0.00331 kg m2. Windings on the motor are designed with 5 pole pairs. Their resistance at 20 ⁰C is 1.8 Ohms and their inductance is 15.2 mH. With these windings the motor can sustain nominal speeds of 3000 RPM and maximum speed of 6000 RPM. MS2N motors can be ordered with different cooling options that include self-cooling and liquid cooling. MS2N07-C1BNN-CMSH1-NNNNN-NN is a self-cooled servo motor. It delivers rated output when the ambient temperature is below 40 ⁰C. However, Bosch does permit motor operation with derated output at temperatures of up to 60 ⁰C.
Depending on feedback accuracy requirements, operators can order motor encoders with varying resolutions. The ACUROlink encoder on the MS2N07-C1BNN-CMSH1-NNNNN-NN motor supports 20-bit feedback resolution. This multiturn encoder is a key component of the control system that ensures this motor can operate with speeds and torque positions that closely match set points configured by the system operators. One cable carries power and feedback signals for the motor. The input voltage rating of the motor is 400 or 480 Volts AC. The performance characteristics vary with input frequency, and you can refer to the torque-speed curves in the product manual. The smooth motor shaft is without a seal. Therefore, the protection rating of the motor is IP64. An optional feature that is available on this servo motor is a holding brake. Additional motor features include use of a standard varnish on the housing and standard bearings.
Frequently Asked Questions about MS2N07-C1BNN-CMSH1-NNNNN-NN:
Q: What is the operating temperature?
A: The recommended operating temperature is 0 to 40 ⁰C.
Q: What is the recommended site elevation?
A: The recommended site elevation is up to 1000 meters.
Q: Is a holding brake installed on the motor?
A: An electrically released holding brake is installed on the motor.
Q: What is the motor mass?
A: Mass of the motor is 14 kilograms.
Q: What is the brake's holding torque?
A: Holding torque of the brake is 20 Nm.
