MS2N07-C1BNN-BMUH1-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911399052
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C1BNN-BMUH1-NNNNN-NN is a synchronous servo motor delivering a rated power of 1.3 kW and a rated torque of 4.6 Nm. Manufactured by Bosch Rexroth Indramat, it belongs to the MS2N Synchronous Servo Motors series featuring IP65 protection and a rated speed of 3000 rpm. This motor includes self-cooling capabilities.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MS2N07-C1BNN-BMUH1-NNNNN-NN is a three-phase permanent magnet synchronous motor belonging to the MS2N07 series. It is built by Bosch Rexroth with a C-size frame length. It incorporates a low-inertia rotor to enable quick acceleration and deceleration in operational cycles. The BN winding version supports a nominal rotational speed of 3000 revolutions per minute.
The cooling of the MS2N07-C1BNN-BMUH1-NNNNN-NN servo motor is provided through a natural convection system in IC410 classification. The angular mass of the rotor is 0.00331 kgm2 to support efficient load control in industrial automation. The feedback system includes a standard encoder delivering 128 signal cycles. It operates on the HIPERFACE® interface. Its multiturn configuration allows 4,096 absolute revolutions for accurate position control across multiple turns. The electrical interface features a dual-cable M17 connection with a rotatable coupling for installation adaptability. The output shaft of the MS2N07-C1BNN-BMUH1-NNNNN-NN servo motor is plain and designed without a sealing ring. The holding brake is installed and powered by a 24 V DC source. The housing is finished with standard protective coating in RAL 9005 black. The motor has a continuous output power of 3.04 kW. The peak torque capacity reaches 46.0 Nm at 20°C and 42.2 Nm at 100K. The peak current capability is 29.5 A. The mechanical speed ceiling is 6000 rev/min.
This MS2N07-C1BNN-BMUH1-NNNNN-NN servo motor is constructed with a B5 / IM3001 mounting arrangement. It is equipped with a PT1000 temperature sensor for heat monitoring. It contains standard-grade bearings and flange precision with no special or custom configurations. The stall torque at a 100K temperature rise is 14.5 Nm. It has a stall current rating of 8.35 A. The continuous speed rating at 100K is 3020 RPM. It offers a continuous torque rating of 9.60 Nm. The continuous current draw is 5.80 A.
Frequently Asked Questions about MS2N07-C1BNN-BMUH1-NNNNN-NN:
Q: How does Bosch Rexroth MS2N07-C1BNN-BMUH1-NNNNN-NN handle high-speed load reversals?
A: The MS2N07-C1BNN-BMUH1-NNNNN-NN Servo motor leverages its low-inertia rotor for quick directional changes. The reduced mass allows minimal overshoot during rapid acceleration and deceleration sequences.
Q: What encoder alignment considerations apply to Bosch Rexroth MS2N07-C1BNN-BMUH1-NNNNN-NN?
A: The MS2N07-C1BNN-BMUH1-NNNNN-NN Servo motor benefits from precise encoder mounting to maintain positional accuracy. The HIPERFACE® interface requires secure cable routing to avoid data signal degradation.
Q: How does Bosch Rexroth MS2N07-C1BNN-BMUH1-NNNNN-NN perform with regenerative drive systems?
A: The MS2N07-C1BNN-BMUH1-NNNNN-NN Servo motor efficiently returns energy during deceleration to compatible drives. The system must ensure voltage regulation to protect sensitive control electronics.
Q: What thermal monitoring strategies improve Bosch Rexroth MS2N07-C1BNN-BMUH1-NNNNN-NN reliability?
A: The MS2N07-C1BNN-BMUH1-NNNNN-NN Servo motor uses a PT1000 sensor for precise heat tracking. The continuous monitoring helps prevent insulation degradation under heavy or fluctuating loads.
Q: Which shaft coupling methods are ideal for Bosch Rexroth MS2N07-C1BNN-BMUH1-NNNNN-NN?
A: The MS2N07-C1BNN-BMUH1-NNNNN-NN Servo motor benefits from flexible couplings to handle slight misalignment. The plain shaft requires exact bore matching to maintain drive concentricity.
