MS2N07-C0BQN-CMSH1-NNNNN-NN

Product Description:

The MS2N07-C0BQN-CMSH1-NNNNN-NN is a self-cooled servo motor from the MS2N Synchronous Servo Motors series by Bosch Rexroth Indramat. This model sits in the lineup with a frame size of 07 and pulls its weight on the shop floor with a rated torque of 9.2 Nm. Rated power is set at 2.0 kW, so there’s enough going on here for most standard tasks in automation lines or when load cycles repeat a lot. From the start, a rated speed of 3000 rpm lets equipment ramp and run without lag. Voltage comes standard at 400 V, which matches common installations and keeps wiring straightforward.

Tech inside is built for accuracy and protection. Feedback comes by way of Singleturn Hiperface, assisting in strong motion control and position checking. When lots of cables start crisscrossing in the cabinet, the rotatable connector orientation does plenty to get connections in tighter. Cooling doesn’t rely on any extras—the self-cooled design uses its own body to get heat out, no need for external blowers that bump up complexity. IP65 ingress protection keeps parts safe from dust and water spray, which matters around coolant or washdown stations. And if the job needs those occasional bursts of power, maximum torque clocks in at 36.6 Nm without risking the hardware.

The appearance of the unit is neat, but really, the appeal comes from adding reliability without fuss. Common spots for this model: automation robots, conveyor drives, or spots where constant position update is routine. Setup doesn’t drag on thanks to the easy-rotate connector and clear marking on the housing. Fluctuations or voltage sags aren’t a worry at 400 V, with enough room to keep stability. Maximum speed rises up to 6000 rpm, so if process changes ask for quick shifting, the hardware doesn’t hold anything back.