MS2N07-C0BQN-BSUG0-NNNNN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911387196
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C0BQN-BSUG0-NNNNN-NN servo motor features a nominal rated torque of approximately 24 Nm and is self-cooled via natural convection. Manufactured by Bosch Rexroth Indramat as part of the MS2N Synchronous Servo Motors series, it operates at a rated voltage of 400 V AC and has an IP65 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This innovative synchronous motor with a part number MS2N07-C0BQN-BSUG0-NNNNN-NN presents a size “07” corresponds to approx. 100 mm flange size. This ensures compatibility with standard mounting provisions. Length designation “C” (length C as per datasheet) indicates a defined motor length which assists in predicting installation envelope. A rated power rating varies depending on winding and typically reaches up to 5.7 kW and such capability supports higher-load applications. The rated torque nominally around 24 Nm provide sufficient force for medium-duty positioning tasks.
The module operates at a speed rated at 3500 rpm which allows fast operational cycles in automation systems. Its rated voltage of 400 V AC matches common 3‑phase industrial supplies. The encoder type BSU refers to a single‑turn, Hiperface SICK STEGMANN absolute encoder which allow accurate positional motor feedback. Brake option “0” signifies absence of holding brake, thus reduces mechanical components and lowers financial cost. Electrical connections use rotatable connectors for a flexible cable orientation in tight cabinets. Protection rating IP65 guarantees dust-tight and water-jet resistance, allowing usage in varied environments. Cooling approach by self‑cooling or natural convection reduces product’s maintenance.
The MS2N07-C0BQN-BSUG0-NNNNN-NN variant has rotor inertia without brake of around 0.00305 kg·m² which yields better dynamic response in motion. A specification indicates maximum torque up to 360 Nm across MS2N range enables handling of high transient loads reliably. Further statistics state that maximum speed reaches up to 6000 rpm in MS2N07 variants that permits high‑speed operation when required. The inclusion of a plain shaft with a sealing ring simplifies coupling. Furthermore, a bolt circle diameter 165 mm matches industry‑standard flange pattern which facilitates mechanical interchangeability. Also, its weight of approximately 9.5 kg supports handling and mounting considerations.
Frequently Asked Questions about MS2N07-C0BQN-BSUG0-NNNNN-NN:
Q: What benefit does the Hiperface SICK STEGMANN BSU encoder deliver?
A: This variant with Hiperface SICK STEGMANN BSU encoder type delivers absolute single‑turn position data which ensures precise control without homing sequences after power loss.
Q: Why is a 400 V AC rating specified for the MS2N07-C0BQN-BSUG0-NNNNN-NN?
A: This rated voltage range defines electrical supply alignment. Matching nominal line voltage avoids conversion losses and simplifies power infrastructure.
Q: Why is absence of holding brake noted as option 0 important?
A: Brake option “0” indicates no built‑in brake. That reduces mechanical complexity and eliminates torque drag during operation.
Q: How does rotatable connector orientation improve installation?
A: Connector rotatability in the MS2N07-C0BQN-BSUG0-NNNNN-NN facilitates alignment in compact enclosures and supports flexible cable routing without stress.
Q: How does IP65 protection type ensure safety to MS2N07-C0BQN-BSUG0-NNNNN-NN?
A: Drive with IP65 protection type rating verifies resistance to dust ingress and low‑pressure water jets. It supports usage in environments requiring washdown or dust sealing.
