MS2N07-C0BQN-AMUG0-NNANN-NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911380290
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MS2N07-C0BQN-AMUG0-NNANN-NN is a synchronous servo motor with a rated speed of 3000 rpm and naturally cooled design. Manufactured by Bosch Rexroth Indramat, it belongs to the MS2N Synchronous Servo Motors series. This motor offers an integrated multiturn absolute encoder and delivers a maximum torque of 24.5 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This MS2N07-C0BQN-AMUG0-NNANN-NN synchronous servomotor produced by Bosch Rexroth Indramat supports continuous and intermittent operation modes. The motor connection is established using separate cables and connectors for power and feedback. This product’s electrical installation should be done in compliance with the protection requirements related to EMC directives. The device’s vertical axes must be secured against falling after the motor disconnection by locking them mechanically or ensuring sufficient weight compensation. This unit’s surface must be at a considerable distance from the connection cables when it is hot. Its permanent magnets generate magnetic and electromagnetic fields. The motor contains components that are likely to get destroyed because of electrostatic charge.
This product is intended to be worked on using only VDE tools. The device’s drive end and non-drive end refer to its Side A and Side B respectively. This unit comprises fixed and floating bearings. It is automatically disconnected from the power supply when the temperature reaches 150 °C. The motor’s cooling system must have the ability to dissipate the heat of the motor. This product’s cooling liquid should be chosen such that the cooling system is not corroded. The device’s encoder deploys a capacitive sampling method. This unit’s parameter data are output digitally through a Hiperface protocol. Its noise emission is affected by the installation situation.
The synchronous servomotor’s encoder supports 4,096 revolutions. This product’s continuous operation depends on the DC bus voltage of the drive controller. The device’s permanent magnets must be demagnetized before disposal. The unit supports up to 100 m/s² axial shock load during transport as well as storage. It has a tolerance limit of +/-5% for most of its technical data.
Frequently Asked Questions about MS2N07-C0BQN-AMUG0-NNANN-NN:
Q: What is the maximum allowed radial shock load of the MS2N07-C0BQN-AMUG0-NNANN-NN motor?
A: The maximum allowed radial shock load of the MS2N07-C0BQN-AMUG0-NNANN-NN motor is 300 m/s² for 11 ms.
Q: What should be done if the storage period of the MS2N07-C0BQN-AMUG0-NNANN-NN motor is more than 12 months?
A: The MS2N07-C0BQN-AMUG0-NNANN-NN motor should be run without load at 800 to 1000 rpm speed for an hour if the storage period exceeds 12 months.
Q: What check should be done on the eye bolts of the MS2N07-C0BQN-AMUG0-NNANN-NN motor before using them?
A: The eye bolts of the MS2N07-C0BQN-AMUG0-NNANN-NN motor should be checked for proper seating before using them.
Q: What is the ambient operating temperature of the MS2N07-C0BQN-AMUG0-NNANN-NN motor?
A: The ambient operating temperature of the MS2N07-C0BQN-AMUG0-NNANN-NN motor is 0 °C to 40 °C.
Q: What is the maximum permitted installation elevation of the MS2N07-C0BQN-AMUG0-NNANN-NN motor?
A: The maximum permitted installation elevation of the MS2N07-C0BQN-AMUG0-NNANN-NN motor is 3000 m above sea level.
